SLB Oilfield Data Parameters - Tab Delimited Report ( September 13, 2001 )

Code (TAB) Description (TAB) Unit Quantity
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
10_MINUTE_GEL_STRENGTH	Shear Stress required to break a gel fluid previously allowed to remain at rest for 10 minutes.	ShearStress
10_MINUTE_GEL_TEST_DEFLECTION	The maximum reading (deflection) taken from a direct-reading viscometer after the fluid has been quiescent for 10 minutes.	PlaneAngle
10_SECOND_GEL_STRENGTH	Shear Stress required to break a gel fluid previously allowed to remain at rest for 10 seconds.	ShearStress
10_SECOND_GEL_TEST_DEFLECTION	The maximum reading (deflection) taken from a direct-reading viscometer after the fluid has been quiescent for 10 seconds.	PlaneAngle
1CMD	Command User Word	Unitless
1_MINUTE_GEL_STRENGTH	Shear Stress required to break a gel fluid previously allowed to remain at rest for 1 minute.	ShearStress
1_MINUTE_GEL_TEST_DEFLECTION	The maximum reading (deflection) taken from a direct-reading viscometer after the fluid has been quiescent for 1 minutes.	PlaneAngle
2CMD	Command Basic Instruction Word	Unitless
30_MINUTE_GEL_STRENGTH	Shear Stress required to break a gel fluid previously allowed to remain at rest for 30 minutes.	ShearStress
30_MINUTE_GEL_TEST_DEFLECTION	The maximum reading (deflection) taken from a direct-reading viscometer after the fluid has been quiescent for 30 minutes.	PlaneAngle
3MSG	3' Minimum Sliding Gate Time	ShortTime
5MSG	5' Minimum Sliding Gate Time	ShortTime
6IN	Force 6 in. Frame Spacing	Unitless
7MSG	7' Minimum Sliding Gate Time	ShortTime
A	Exponent A of the Archie Formation Factor - Porosity Equation	Unitless
A1	A1	Unitless
A10HM	Multiplier of Standard Deviation on Measure of A10H	Unitless
A10M	AIT 10 in. Uncertainty Multiplier	Unitless
A13HM	Multiplier of Standard Deviation on Measure of A13H	Unitless
A16HM	Multiplier of Standard Deviation on Measure of A16H	Unitless
A1BC	APS Array-1 Near Epithermal Detector Background Countrate	CountRate
A1CN	Minimum of Color Scale for Image of Echo 1 Amplitude minus Average	Attenuation
A1CX	Maximum of Color Scale for Image of Echo 1 Amplitude minus Average	Attenuation
A1PA	Auxiliary Step 1 Pause Before Measurement	Dimensionless
A2	A2	Unitless
A20M	AIT 20 in. Uncertainty Multiplier	Unitless
A22HM	Multiplier of Standard Deviation on Measure of A22H	Unitless
A28HM	Multiplier of Standard Deviation on Measure of A28H	Unitless
A2BC	APS Array-2 Near Epithermal Detector Background Countrate	CountRate
A2CN	Minimum of Color Scale for Image of Echo 2 Amplitude minus Average	Attenuation
A2CX	Maximum of Color Scale for Image of Echo 2 Amplitude minus Average	Attenuation
A2EX	HALS A2 Extended (Groningen effect)	Dimensionless
A2FT	Auxiliary Step 2 Filter Type	Unitless
A2PA	Auxiliary Step 2 Pause Before Measurement	Dimensionless
A3	A3	Unitless
A30M	AIT 30 in. Uncertainty Multiplier	Unitless
A31HM	Multiplier of Standard Deviation on Measure of A31H	Unitless
A34HM	Multiplier of Standard Deviation on Measure of A34H	Unitless
A3PA	Auxiliary Step 3 Pause Before Measurement	Dimensionless
A60M	AIT 60 in. Uncertainty Multiplier	Unitless
A90M	AIT 90 in. Uncertainty Multiplier	Unitless
AAMN	Minimum of Automatic Amplitude scale	Attenuation
AAPL	Array Induction Answer Product Level(Depth Log/View only)	Unitless
AAPS	ARC Attenuation and Phase Shift Source	Unitless
AAWH	Azimuth Antenna Well Head	PlaneAngle
ABANDON_PRESSURE	The pressure at which a reservoir was or is expected to be abandoned.	Pressure
ABANDON_TIME	The time that a reservoir was or is anticipated to be abandoned.	Unitless
ABCI	Balancing Current Injector for Top Electrode Triplet	Dimensionless
ABHM	Array Induction Borehole Correction Mode	Unitless
ABHV	Array Induction Borehole Correction Code Version Number	Unitless
ABLM	Array Induction Basic Logs Mode	Unitless
ABLV	Array Induction Basic Logs Code Version Number	Unitless
ABMM	APS Minitron Neutron Burst Mode	Unitless
ABOS	APS Neutron Burst-Off Background Subtraction Switch	Unitless
ABQ1	Absorption Factor in First Layer	Unitless
ABQ2	Absorption Factor in Second Layer	Unitless
ABSM	APS Minitron Beam Current Set Point	LowCurrent
ABSOLUTE_ABUNDANCE	Quantity of members in a group, as expressed as a count and count units, such as 5 sacks, 3 boxes, or 4 items.	Unitless
ABSOLUTE_DELTA_FLOWRATE	Absolute value of Delta Flow Rate	Flowrate
ABSOLUTE_PERMEABILITY	The permeability of porous material when completely saturated with a wetting fluid and without the influence of non-Darcy (turbulence) effects. Also called "intrinsic" permeability.	Permeability
ABSOLUTE_ROUGHNESS	Average amplitude of rugosity, such as the variations in the radius of tubing.	CylinderDiameter
ABSS	APS Borehole Salinity Correction Switch	Unitless
ABV	Arming Window Bell Volume	Unitless
ACBN	ACT Calibration Blanket Number	Unitless
ACCC	Accelerometer coefficients	Unitless
ACCELERATION_MODE	Inversion Acceleration Mode (options: Slow Medium Fast)	Unitless
ACCIDENT_TYPE	Type of Quality, Health, Safety, and Environmental accident such as Fluid Spill, Kick While Drilling, Kick While Tripping, ...	Unitless
ACCM	Accelerometer Month of Calibration	Unitless
ACCN	Accelerometer Serial Number	Dimensionless
ACCT	Accelerometer Type	Unitless
ACCY	Accelerometer Year of Calibration	Unitless
ACDE	Array Induction Casing Detection Enable	Unitless
ACDSPN	Acoustic Dispersion	AcousticSlowness
ACEN	Array Induction Tool Centering Flag (in Borehole)	Unitless
ACID_CONCENTRATION	Concentration of acid.	Percent
ACID_TREATMENT_COUNT	Number of acid jobs	Unitless
ACLA	Automatic Curve labeling control	Length
ACM	Azimuth Computation Mode	Unitless
ACMS	APS Casing-Cement Correction Switch	Unitless
ACOUSTIC_CONTRAST	Interface property which is the difference between the Acoustic Impedance values of two adjacent beds.	AcousticImpedance
ACOUSTIC_IMPEDANCE	Property which controls the propagation of an ultrasonic wave at a boundary interface. It is the product of the material density and the acoustic wave velocity within the material.	AcousticImpedance
ACOUSTIC_VELOCITY	The velocity of an acoustic wave which represents the rate at which the wave travels from one point to another.	AcousticVelocity
ACPP	Accelerometer PROM Presence Flag	Unitless
ACQM	RST Acquisition Mode Selection	Unitless
ACQMOD	Acquisition Mode	Unitless
ACQN	Acquisition Number	Dimensionless
ACQU	Acquisition Mode	Dimensionless
ACQUISITION_ENABLE_FLAG	Flag indicating whether or not acquisition is enabled for this activity.	Unitless
ACQ_METHOD_OPT	Acquisition Method Option	Unitless
ACRL	Array Induction Calibrate Report Length	Unitless
ACSED	Array Induction Casing Shoe Estimated Depth	Length
ACSM	APS Minitron Cathode Current Set Point	ElectricCurrent
ACSR	Array Cycle Skip Recovery	Unitless
ACST	Acidization Status	Unitless
ACTIVATION_PRESSURE	Pressure at which recording should begin	Pressure
ACTIVATION_TEMPERATURE	Temperature at which recording should begin	Temperature
ACUP	Constant Update Switch	Unitless
ACYC	Acquisition Sine Wave Cycles	Dimensionless
ADAC	Automatic D-A Convert	Unitless
ADCO	ADC Offset	Unitless
ADDRESS	The location where some entity or information may be found or contacted.	Unitless
ADEL	Actual (Digitizing) Delay	Unitless
ADEV	Standard Deviation Output	Unitless
ADFO	Accelerometer Data Format	Unitless
ADGC	Automatic Downhole Gain Control	Unitless
ADITM	Array Induction Desired Tool Mode	Unitless
ADJUSTABLE_CHOKE_FLAG	Flag indicating whether this flow period was performed on an adjustable choke, i.e., when set: adjustable choke, not set: fixed choke.	Unitless
ADMITTANCE	The reciprocal of Impedance. The property of a medium to allow for the flow of an alternating current.	Conductance
ADMN	Second Echo Amplitude Minus First Echo Amplitude Minimum value	Attenuation
ADMX	Second Echo Amplitude Minus First Echo Amplitude Maximum value	Attenuation
ADN_PROC_OPT	ADN Processing Options, e.g. Density, Neutron, or Both	Unitless
ADR	Deviation Angle of the Reservoir	PlaneAngle
ADSO	APS Array Detectors Data Source Switch	Unitless
ADSORPTION	The adhesion in an extremely thin layer of molecules (as of gases, solutes, or liquids) to the surfaces of solid bodies or liquids with which they are in contact	Unitless
ADTM	Adjust Delta-T Minimum	AcousticSlowness
ADTMUD	The averaged mud slowness	AcousticSlowness
ADV	Density Value for Ash as Used in Coal Determination	Density
AEBC	Array Induction Enable Borehole Correction	Unitless
AEBL	Array Induction Enable Basic Logs	Unitless
AECS	Auto Electronic Calibration Switch	Unitless
AEFDD	Array Induction Export File Destination directory	Unitless
AEGS	Electrode Group Selector for ABC Electrode Triplet	Dimensionless
AERP	Array Induction Enable Radial Processing	Unitless
AETO	Agarwal Effective Delta-Time Option	Unitless
AETP	Array Induction Enable Sonde Error Temp&Pres Corr	Unitless
AFD	Automatic Fire Delay	ShortTime
AFDS	Ags Fluid Displacement Sleeve	Unitless
AFFINE_COEFF_A	Coefficient "A" in an Affine transformation between two coordinate systems. The input and output coordinate systems may be local or projection systems.	Unitless
AFFINE_COEFF_B	Coefficient "B" in an Affine transformation between two coordinate systems. The input and output coordinate systems may be local or projection systems.	Unitless
AFFINE_COEFF_C	Coefficient "C" in an Affine transformation between two coordinate systems. The input and output coordinate systems may be local or projection systems.	Unitless
AFFINE_COEFF_D	Coefficient "D" in an Affine transformation between two coordinate systems. The input and output coordinate systems may be local or projection systems.	Unitless
AFFINE_COEFF_E	Coefficient "E" in an Affine transformation between two coordinate systems. The input and output coordinate systems may be local or projection systems.	Unitless
AFFINE_COEFF_F	Coefficient "F" in an Affine transformation between two coordinate systems. The input and output coordinate systems may be local or projection systems.	Unitless
AFFN	Formation Factor Numerator	Unitless
AFIS	Auxiliary Film Index Source	Unitless
AFMO	Accelerometer Filtering Mode	Unitless
AFRSV	Array Induction Response Set Version for Four ft Resolution	Unitless
AFS	Auto Frequency Switch	Unitless
AFSM	APS Minitron Filament Current Set Point	ElectricCurrent
AFVN	Array Induction Firmware Code Version Number	Unitless
AGC	Automatic Gain Control Status	Unitless
AGCF	Automatic Gain Control Factor (for VSP)	Unitless
AGCT	Automatic Gain Control Time Parameters for VSP Processing	Time
AGENCY_LEASE_NUMBER	Unique lease number assigned by leasing agency	Unitless
AGM	Amplitude Gate Mode for CBL	Unitless
AGMN	Minimum Gain of Cartridge	Attenuation
AGMX	Automatic Gain Maximum of Cartridge	Attenuation
AGOS	ALAT-GPIT Offset	Length
AGPD	Amplitude Gate Past Detection	ShortTime
AGREEMENT_INTEREST	Percentage of interest held by one of the potentially many organizations holding a lease agreement.	Unitless
AGREEMENT_STATUS	Status of a lease agreement.	Unitless
AGSC	ADGC (Automatic Downhole Gain Control) Skip Count	Unitless
AGSM	APS Minitron Grid Current Set Point	ElectricCurrent
AGSR	GSR-U Reference	APIGammaRay
AGTD	Silver (AG) Tracer Detection Enable Constant	Unitless
AGW	Amplitude Gate Width	Time
AHAPL	Array Induction Answer Product Level(Depth Log/View only)	Unitless
AHBHM	Array Induction Borehole Correction Mode	Unitless
AHBHV	Array Induction Borehole Correction Code Version Number	Unitless
AHBLM	Array Induction Basic Logs Mode	Unitless
AHBLV	Array Induction Basic Logs Code Version Number	Unitless
AHCDE	Array Induction Casing Detection Enable	Unitless
AHCEN	Array Induction Tool Centering Flag (in Borehole)	Unitless
AHCRL	Array Induction Calibrate Report Length	Unitless
AHCS	APS Hole Size Correction Source	Unitless
AHCSED	Array Induction Casing Shoe Estimated Depth	Length
AHDITM	Array Induction Desired Tool Mode	Unitless
AHEBC	Array Induction Enable Borehole Correction	Unitless
AHEBL	Array Induction Enable Basic Logs	Unitless
AHEFDD	Array Induction Export File Destination directory	Unitless
AHERP	Array Induction Enable Radial Processing	Unitless
AHETP	Array Induction Enable Sonde Error Temp&Pres Corr	Unitless
AHFRSV	Array Induction Response Set Version for Four ft Resolution	Unitless
AHIGS	Array Induction Select Akima Interpolation Gating	Unitless
AHLNV	Array Induction Log Not Valid Flag	Unitless
AHMCT	Array Induction Master Calibrated Sonde Temperature	Temperature
AHMDT	Array Induction Master Date and Time	Unitless
AHMGC	Array Induction Master Calibrated Mud Resistivity Gain - Coarse	Unitless
AHMGF	Array Induction Master Calibrated Mud Resistivity Gain - Fine	Unitless
AHMRC	Array Induction Mud Calibration Reference Resistivity - Coarse	Resistivity
AHMRD	Array Induction Mud Resistivity Calibration Depth	Length
AHMRF	Array Induction Mud Resistivity Factor	Unitless
AHMSE	Array Induction Master Sonde Error Correction	Conductivity
AHMTL	Array Induction Master Test Loop Gain Correction	Unitless
AHORSV	Array Induction Response Set Version for One ft Resolution	Unitless
AHRFV	Array Induction Radial Profiling Code Version Number	Unitless
AHRPM	Array Induction Radial Processing Mode	Unitless
AHRPV	Array Induction Radial Parametrization Code Version Number	Unitless
AHSAP	Array Induction Suspend Answer Product Processing	Unitless
AHSCT	Array Induction Sonde Characterization Time	Unitless
AHSM	APS Minitron High Voltage Set Point	HighElectricPotential
AHSPC	Array Induction Sonde Characterization Pressure Coefficients	Unitless
AHSS	APS Hole Size Correction Switch	Unitless
AHSTA	Array Induction Tool Standoff	Length
AHSTC	Array Induction Sonde Characterization Temperature Coefficients	Unitless
AHSTL	Array Induction Sonde Characterization Time (as an integer)	Unitless
AHTNO	Array Induction Tool Serial Number	Unitless
AHTRSV	Array Induction Response Set Version for Two ft Resolution	Unitless
AHTSE	Array Induction Temperature Selection(Sonde Error Correction)	Unitless
AHTTY	Array Induction Tool Type (of acquired data)	Unitless
AHWM	Acquisition Hardware Mask	Unitless
AI	Averaging Interval	Length
AIAL	Acoustic Impedance Algorithm	Unitless
AIGS	Array Induction Select Akima Interpolation Gating	Unitless
AIRB	RST Air Borehole	Unitless
AIRL	Long Spacing Caliper Air Voltage	ElectricPotential
AIRS	Short Spacing caliper Air Voltage	ElectricPotential
AIR_SUPPLY_PRESSURE	Air supply pressure; for a burner, the pressure required to achieve effective atomization	Pressure
AITBCM	AIT Borehole Corrections Mode	Unitless
AITDIP	AIT Dip Angle	PlaneAngle
AITH_IND_MP	AIT/IND Measure Point Offset	Length
AITH_MUD_MP	AIT/MUD Measure Point Offset	Length
AITH_SPA_MP	AIT/SPA Measure Point Offset	Length
AITH_TEMP_MP	AIT/TEMP Measure Point Offset	Length
AITH_VOLT_MP	AIT/VOLT Measure Point Offset	Length
AITSEL	AIT Tool Type Selection	Unitless
AK	Factor to Multiply by Porosity in Perm Equation	Unitless
AKFC	ALAT Azimuthal K Factor Value	Unitless
AKL	Porosity Multiplier for Exponent in Logarithmic Perm Equation	Unitless
ALAC	ALAT Loop A Coefficient	Unitless
ALAR	Alarm Message	Unitless
ALBI_ZP	Zoned Volume of Albite	StandardVolumeRatio
ALGA	AL Gain to Convert CPS to Weight Percent	Unitless
ALGO	ALAT Loop Gain Option	Dimensionless
ALKALINITY	Concentration of basic anions in an aqueous solution (e.g. OH-, CO3-- and HC03-)	PartPerMillion
ALLITH_LDS	LDS Long-Spaced LITH Window Aluminum Block Calibration Countrate	CountRate
ALLL	Calibration of LL in Aluminum Block	Unitless
ALLL_LDS	LDS Long-Spaced LL Window Aluminum Block Calibration Countrate	CountRate
ALLOW_EDITING	States if the report generator should allow the user to edit the generated report	Unitless
ALLS	Calibration of LS in Aluminum Block	Unitless
ALLU	Calibration of LU in Aluminum Block	Unitless
ALLU_LDS	LDS Long-Spaced LU Window Aluminum Block Calibration Countrate	CountRate
ALNV	Array Induction Log Not Valid Flag	Unitless
ALOF	AL Offset to Convert CPS to Weight Percent	Unitless
ALPI	Alpha Boost Factor	Unitless
ALSS1_LDS	LDS Short-Spaced SS1 Window Aluminum Block Calibration Countrate	CountRate
ALSS2_LDS	LDS Short-Spaced SS2 Window Aluminum Block Calibration Countrate	CountRate
ALTDPCHAN	Name of alternate depth channel	Unitless
ALTERNATE_PHONE_NUMBER	Alternate phone number, including country code.	Unitless
ALTI	Altitude	StandardDepthIndex
ALTITUDE	Height above a reference level, usually the geoid (e.g., mean sea level).	Length
ALW1	Far Window 1 in Aluminum	Unitless
ALW2	Far Window 2 in Aluminum	Unitless
ALW3	Far Window 3 in Aluminum	Unitless
ALW4	Far Window 4 in Aluminum	Unitless
ALW5	Far Window 5 in Aluminum	Unitless
AM2A	ARC Air Calibration Amplitude Offset at 2 MHz	Unitless
AMCM	Minimum of Color Scale for Image of Amplitude minus Maximum	Attenuation
AMCN	Array Induction Master Cartridge Serial Number	Unitless
AMCS	APS Mud Cake Correction Switch	Unitless
AMCT	Array Induction Master Calibrated Sonde Temperature	Temperature
AMCX	Maximum of Color Scale for Image of Amplitude minus Maximum	Attenuation
AMD	Azimuth of Maximum Deviation	PlaneAngle
AMDT	Array Induction Master Date and Time	Unitless
AMGC	Array Induction Master Calibrated Mud Resistivity Gain - Coarse	Unitless
AMGF	Array Induction Master Calibrated Mud Resistivity Gain - Fine	Unitless
AMLO	Amplitude Low	Unitless
AMOD	Averaging Mode Selection	Unitless
AMON	Automatic Monitoring	Unitless
AMOUNT	Quantity, total number	Unitless
AMOUNT_OF_SUBSTANCE	The amount of a particular substance (e.g. chemical) expressed in units of moles.	AmountOfSubstance
AMPL	Sonic Amplitude Select	Unitless
AMPLITUDE_SPECTRUM_TYPE	Amplitude spectrum output e.g. Scale_In_DB, Linear_Scale	Unitless
AMPL_COMPENSATION_TYPE	Geometrical spreading compensation factor	Unitless
AMP_DIST_ANT1_VDL_MAX	Antenna 1 T2 Distribution VDL Maximum Color	Unitless
AMP_DIST_ANT1_VDL_MIN	Antenna 1 T2 Distribution VDL Minimum Color	Unitless
AMP_DIST_ANT2_VDL_MAX	Antenna 2 T2 Distribution VDL Maximum Color	Unitless
AMP_DIST_ANT2_VDL_MIN	Antenna 2 T2 Distribution VDL Minimum Color	Unitless
AMP_MC_25	Master Calibration Amplitude Corrected to 25 degC	Unitless
AMRC	Array Induction Mud Calibration Reference Resistivity - Coarse	Resistivity
AMRD	Array Induction Mud Resistivity Calibration Depth	Length
AMRF	Array Induction Mud Resistivity Factor	Unitless
AMRS	Selection Status of MRES From AMS Tool	Unitless
AMSE	Array Induction Master Sonde Error Correction	Conductivity
AMSG	Auxiliary Minimum Sliding Gate	Time
AMSL	Mode Slow Loop	Unitless
AMSR	Manual/Automatic Shot Rejection	Unitless
AMT	Anchor Motor Type	Unitless
AMTL	Array Induction Master Test Loop Gain Correction	Unitless
AMTN	Array Induction Master Transmitter Serial Number	Unitless
AMTS	Selection Status of MTEM From AMS Tool	Unitless
AMTY	APS Environmental Corrections Mud Type	Unitless
AMUD	Attenuation in Mud	AttenuationPerLength
AMUD_MODE	Attenuation in Mud Source Mode	Unitless
AMWS	APS Mud Weight Correction Switch	Unitless
ANCHOR_TENSION	Tension of the anchor chains or cables of a marine vessel; may be implemented as a vector.	HighForce
ANCT	ACT Calibrator Type	Unitless
ANGC	ACT Cartridge Number	Dimensionless
ANGD	ACT Detector Number	Dimensionless
ANGJ	ACT Jig Number	Dimensionless
ANGL	Average Angle of Well	PlaneAngle
ANGO	Angular Offset	PlaneAngle
ANGULAR_VELOCITY	Rotation rate, usually measured in revolutions per unit time; e.g., spinner speed, motor speed, etc. The term Angular Frequency is also used, but generally refers to data scaled in radians per second.	RotationalVelocity
ANGX_MRWD	MRWD Quadrant Calibration Angle From Directional Tool	PlaneAngle
ANGX_MRWD_TOL	MRWD Tolerance for Angle X	PlaneAngle
ANHY	Anhydrite Facies	Unitless
ANHY_ZP	Zoned Volume of Anhydrite	StandardVolumeRatio
ANI	Horizontal Anisotropy Factor	Unitless
ANIS	Anisotropy Coefficient	Unitless
ANISOTROPY_APPROX_FACTOR	Value in percentage used in the case of ANISOTROPY_TYPE Approximation to stretch raypath length	Unitless
ANISOTROPY_TYPE	Type of anisotropy e.g. TI, Azimuthal, Approximation	Unitless
ANNUAL_PAYMENT	Annual amount of Payment based on some contractual agreement such as a lease. This could be rental, mortgage or other.	Unitless
ANOT	Annotation Flag on Drift and Time X Depth Log	Unitless
ANST	ACT Sonde Type	Unitless
ANTI_COLLISION_METHOD	Method used for calculating the proximity: 0 - Normal; 1 - Horizontal; 2 - Least Distance	Unitless
ANT_SWITCH_MRWD	MRWD Switch to Select Antennas Used in Signal Processing	Unitless
ANUM	Number of Channels Used To Compute Average	Dimensionless
ANV	Neutron Value for Ash as Used in Coal Determination	Unitless
AOCC	Automatic Offset Correction Constant	Unitless
AOF	Abort on Failure	Unitless
AOFF	Alphanumeric Output to Film Flag	Unitless
AOM	Alarm Off Message	Unitless
AORSV	Array Induction Response Set Version for One ft Resolution	Unitless
AOTS	APS Old Temperature Sensor Switch	Unitless
AP	Abandonment Pressure	Pressure
APCO	Arrow Plot Color	Unitless
APCS	Programmable Correction Slow Loop	Energy
APD	Elevation of Depth Reference (LMF) Above Permanent Datum	StandardDepthIndex
APDA	Automatic Presentation Allow/Disallow Control	Unitless
APEP	Auxiliary Power Enable for PGTM	Unitless
APFP	Automatic Packer Formation Pressure	Unitless
APIG	ARC Gamma Ray API Gain Factor	Unitless
APIN	API Well Number	Unitless
API_CONN_TYPE	API standard connection type for tubular equipment	Unitless
API_COUNTRY_CODE	Code used by the API (American Petroleum Institute) to identify sovereign nations, colonies, overseas territories, etc.	Unitless
API_ENTRANCE_HOLE_DIAMETER	Entrance hole diameter in an API Section I test	Length
API_GRADE	API grade characteristic for strength of tubular equipment	Unitless
API_GRAVITY	A measure of the density of hydrocarbons derived from the equation: API gravity = 141.5/(specific gravity @ 60 degF) - 131.5; usually reported with a temperature.	APIOilGravity
API_NEUTRON	The Neutron calibration measurement determined using the API test pit. This quantity is associated with the natural formation hydrogen concentration.	APINeutron
API_NOM_OD	API nominal outer diameter for tubular equipment	CylinderDiameter
API_NOM_WT	API nominal weight for tubular equipment	MassPerLength
API_PLASTIC_VISCOSITY	Measure of the internal resistance to fluid flow attributable to the amount, type, and size of solids present in a given fluid. When using the direct-indicating viscometer, it is found by subtracting the 300-rpm reading from the 600-rpm reading of a Fann35 rheometer.	DynamicViscosity
API_TOTAL_PENETRATION	Total penetration in an API Section I test	Length
API_WELL_NUMBER	A unique well identification number as defined in the API (American Petroleum Institute) Bulletin D12A, as amended	Unitless
API_YIELD_STRESS	Resistance to initial flow; the stress required to start fluid movement. When using the direct-indicating viscometer, it is found by subtracting plastic viscosity (API_Plastic_Viscosity) from the 300-rpm reading of a Fann35 rheometer.	ShearStress
APLI	Automatic Plot Index	Unitless
APMR	P.M. Resolution Computed in ACT Master	Unitless
APP	Automatic PTIM Picks	Unitless
APPARENT_VISCOSITY	Ratio Shear Stress/Shear Rate. Equal to Newtonian Viscosity for Newtonian fluid.	DynamicViscosity
APPT	Anchor Pad Pressure Threshold	Pressure
APP_ATMD_LL	Apparent Mud Attenuation Lower Limit	Attenuation
APP_ATMD_UL	Apparent Mud Attenuation Upper Limit	Attenuation
APP_DTMD_LL	Apparent Mud Slowness Lower Limit	AcousticSlowness
APP_DTMD_UL	Apparent Mud Slowness Upper Limit	AcousticSlowness
APRE	Atmospheric Pressure	BarometricPressure
AQAL	Count Rate in Americium Lower Window	CountRate
AQAU	Count Rate in Americium Upper Window	CountRate
AQRC	Quality Window Ratio (Calibration)	Unitless
AQRS	Quality Window Ratio (Shop)	Unitless
ARCHIE_POROSITY_CONSTANT	The constant "a" in the Archie formation resistivity factor - porosity relationship.	Unitless
ARCHIE_POROSITY_EXPONENT	The exponent of the Porosity term in the Archie formation resistivity factor - porosity relationship. Abbreviated "m".	Unitless
AREA_PER_MASS	An amount of surface corresponding to a unit mass.	AreaPerMass
ARFV	Array Induction Radial Profiling Code Version Number	Unitless
ARHOB_ALBI	Actual Density value for Albite	Density
ARHOB_ANHY	Actual Density value for Anhydrite	Density
ARHOB_BIOT	Actual Density value for Biotite	Density
ARHOB_CALC	Actual Density value for Calcite	Density
ARHOB_CARB	Actual Density value for Carbonate	Density
ARHOB_CHLO	Actual Density value for Chlorite	Density
ARHOB_CLA1	Actual Density value for Clay 1	Density
ARHOB_CLA2	Actual Density value for Clay 2	Density
ARHOB_COAL	Actual Density value for Coal	Density
ARHOB_DOLO	Actual Density value for Dolomite	Density
ARHOB_EVAP	Actual Density value for Evaporate	Density
ARHOB_FELD	Actual Density value for Feldspar	Density
ARHOB_GLAU	Actual Density value for Glauconite	Density
ARHOB_GYPS	Actual Density value for Gypsum	Density
ARHOB_HALI	Actual Density value for Halite	Density
ARHOB_IGNE	Actual Density value for Igneous	Density
ARHOB_ILLI	Actual Density value for Illite	Density
ARHOB_ISOL	Actual Density value for Isolated	Density
ARHOB_KAOL	Actual Density value for Kaolinite	Density
ARHOB_META	Actual Density value for Metamorphic	Density
ARHOB_MONT	Actual Density value for Montmorillonite	Density
ARHOB_MUSC	Actual Density value for Muscovite	Density
ARHOB_ORTH	Actual Density value for Orthoclase	Density
ARHOB_PARA	Actual Density value for Parallel	Density
ARHOB_PYRI	Actual Density value for Pyrite	Density
ARHOB_QUAR	Actual Density value for Quartz	Density
ARHOB_SAND	Actual Density value for Sand	Density
ARHOB_SHAL	Actual Density value for Shale	Density
ARHOB_SIDE	Actual Density value for Siderite	Density
ARHOB_SILT	Actual Density value for Silt	Density
ARHOB_SMI1	Actual Density value for Special Mineral 1	Density
ARHOB_SMI2	Actual Density value for Special Mineral 2	Density
ARHOB_UGAS	Actual Density value for Undisturbed Zone Gas	Density
ARHOB_UIWA	Actual Density value for Undisturbed Zone Irreducible Water	Density
ARHOB_UOIL	Actual Density value for Undisturbed Zone Oil	Density
ARHOB_USFL	Actual Density value for Undisturbed Zone Special Fluid	Density
ARHOB_UWAT	Actual Density value for Undisturbed Zone Water	Density
ARHOB_XBWA	Actual Density value for Flushed Zone Bound Water	Density
ARHOB_XGAS	Actual Density value for Flushed Zone Gas	Density
ARHOB_XIWA	Actual Density value for Flushed Zone Irreducible Water	Density
ARHOB_XOIL	Actual Density value for Flushed Zone Oil	Density
ARHOB_XSFL	Actual Density value for Flushed Zone Special Fluid	Density
ARHOB_XWAT	Actual Density value for Flushed Zone Water	Density
ARIP_LTS	Long Tool String Correction	Dimensionless
ARIP_SHOULDER	Shoulder Correction	Dimensionless
ARM	Amplitude Recovery Method [1: none (default), 2: spherical divergence, 3: AGC, 4: other]	Unitless
ARMG	Additional Mud Resistivity Gain	Unitless
ARMS	Arm Size	Unitless
ARM_ANGLE_THRESHOLD	Determines how close to requested Maximum arm angle tool must stop	PlaneAngle
ARM_LENGTH	Arm Length of the Tool	CylinderDiameter
ARM_PIVOT_OFFSET	Lateral Offset of the Arm Pivot from the Tool Axis	CylinderDiameter
ARPM	Array Induction Radial Processing Mode	Unitless
ARPV	Array Induction Radial Parametrization Code Version Number	Unitless
ARSG	Auto Ranger Surface Sensor Gain	Unitless
ARST	ALAT Resistivity Threshold	Resistivity
ART	Accelerometer Reference Temperature	Temperature
ARTS	AIT Rt Selection (for ALLRES computation)	Dimensionless
AS2W	Auxiliary Step 2 Waveform Selection	Dimensionless
ASAI	APS Spectrum Averaging Interval	Length
ASAP	Array Induction Suspend Answer Product Processing	Unitless
ASAPL	Array Induction Answer Product Level(Depth Log/View only)	Unitless
ASAP_DEPTH_PARAMETER	Private structure used by the ASAP autotracking application; holds depth variations of time-domain Property ASAP_Parameter.	Unitless
ASAP_PARAMETER	Private structure used by the ASAP autotracking application.	Unitless
ASBHM	Array Induction Borehole Correction Mode	Unitless
ASBHV	Array Induction Borehole Correction Code Version Number	Unitless
ASBLM	Array Induction Basic Logs Mode	Unitless
ASBLV	Array Induction Basic Logs Code Version Number	Unitless
ASCD	ACT Shop Calibration Date	Unitless
ASCDE	Array Induction Casing Detection Enable	Unitless
ASCEN	Array Induction Tool Centering Flag (in Borehole)	Unitless
ASCRL	Array Induction Calibrate Report Length	Unitless
ASCSED	Array Induction Casing Shoe Estimated Depth	Length
ASCT	Array Induction Sonde Characterization Time	Unitless
ASCV	ACT Shop Calibration Value	CountRate
ASDITM	Array Induction Desired Tool Mode	Unitless
ASDS	Aluminum Log Source to Detector Spacing	Length
ASEBC	Array Induction Enable Borehole Correction	Unitless
ASEBL	Array Induction Enable Basic Logs	Unitless
ASEFDD	Array Induction Export File Destination directory	Unitless
ASEL	Presentation Amplitude Select	Unitless
ASERP	Array Induction Enable Radial Processing	Unitless
ASET	Answer Set (Volume Channels Group) Identifier	Unitless
ASETP	Array Induction Enable Sonde Error Temp&Pres Corr	Unitless
ASFRSV	Array Induction Response Set Version for Four ft Resolution	Unitless
ASFVN	Array Induction Firmware Code Version Number	Unitless
ASGL	Auxiliary Sliding Gate Length	Time
ASHU	ACAUX Shutdown	Dimensionless
ASIGS	Array Induction Select Akima Interpolation Gating	Unitless
ASK	Accounting Program	Unitless
ASLNV	Array Induction Log Not Valid Flag	Unitless
ASMCN	Array Induction Master Cartridge Serial Number	Unitless
ASMCT	Array Induction Master Calibrated Sonde Temperature	Temperature
ASMDT	Array Induction Master Date and Time	Unitless
ASMGC	Array Induction Master Calibrated Mud Resistivity Gain - Coarse	Unitless
ASMGF	Array Induction Master Calibrated Mud Resistivity Gain - Fine	Unitless
ASMO	Acquisition Sequence Mode	Dimensionless
ASMRC	Array Induction Mud Calibration Reference Resistivity - Coarse	Resistivity
ASMRD	Array Induction Mud Resistivity Calibration Depth	Length
ASMRF	Array Induction Mud Resistivity Factor	Unitless
ASMSE	Array Induction Master Sonde Error Correction	Conductivity
ASMTL	Array Induction Master Test Loop Gain Correction	Unitless
ASMT_DEPTH_A	Station depths, After	Length
ASMT_DEPTH_B	Station depths, Before	Length
ASMT_MSET_LABEL_A	Measurement set label, After	Unitless
ASMT_MSET_LABEL_B	Measurement set label, Before	Unitless
ASMT_STATIONS_A	Number of stations, After	Unitless
ASMT_STATIONS_B	Number of stations, Before	Unitless
ASMT_W1_ACQ_A	W1 Acquired Values, After	ElectricPotential
ASMT_W1_ACQ_B	W1 Acquired Values, Before	ElectricPotential
ASMT_W2_ACQ_A	W2 Acquired Values, After	ElectricPotential
ASMT_W2_ACQ_B	W2 Acquired Values, Before	ElectricPotential
ASMT_W3_ACQ_A	W3 Acquired Values, After	ElectricPotential
ASMT_W3_ACQ_B	W3 Acquired Values, Before	ElectricPotential
ASMT_W4_ACQ_A	W4 Acquired Values, After	ElectricPotential
ASMT_W4_ACQ_B	W4 Acquired Values, Before	ElectricPotential
ASMT_W5_ACQ_A	W5 Acquired Values, After	ElectricPotential
ASMT_W5_ACQ_B	W5 Acquired Values, Before	ElectricPotential
ASMT_W6_ACQ_A	W6 Acquired Values, After	ElectricPotential
ASMT_W6_ACQ_B	W6 Acquired Values, Before	ElectricPotential
ASNO	Array Induction Sonde Serial Number	Unitless
ASORSV	Array Induction Response Set Version for One ft Resolution	Unitless
ASOS	APS Standoff Correction Switch	Unitless
ASPC	Array Induction Sonde Characterization Pressure Coefficients	Unitless
ASRFV	Array Induction Radial Profiling Code Version Number	Unitless
ASRP	Auto Start Real-Time Plot	Unitless
ASRPM	Array Induction Radial Processing Mode	Unitless
ASRPV	Array Induction Radial Parametrization Code Version Number	Unitless
ASSAP	Array Induction Suspend Answer Product Processing	Unitless
ASSCT	Array Induction Sonde Characterization Time	Unitless
ASSG	Auxiliary Surface Sensor Gain	Unitless
ASSL	Auto Start Station Log	Unitless
ASSN	Source Serial Number for AL Shop Calibration	Unitless
ASSNO	Array Induction Sonde Serial Number	Unitless
ASSPC	Array Induction Sonde Characterization Pressure Coefficients	Unitless
ASSS	Auxiliary Surface Sensor Source	Unitless
ASSTA	Array Induction Tool Standoff	Length
ASSTC	Array Induction Sonde Characterization Temperature Coefficients	Unitless
ASSTL	Array Induction Sonde Characterization Time (as an integer)	Unitless
AST	Adjustable Sample Time	Time
ASTA	Array Induction Tool Standoff	Length
ASTC	Array Induction Sonde Characterization Temperature Coefficients	Unitless
ASTL	Array Induction Sonde Characterization Time (as an integer)	Unitless
ASTRSV	Array Induction Response Set Version for Two ft Resolution	Unitless
ASTSE	Array Induction Temperature Selection(Sonde Error Correction)	Unitless
ASTTY	Array Induction Tool Type (of acquired data)	Unitless
ASUB	Sub (Half-Shells) Choice	Dimensionless
ASUW	Allowed Statistical Uncertainty on WC2	Unitless
ASV	Sonic Value for Ash as Used in Coal Determination	AcousticSlowness
ASW1	Near Window 1 in Aluminum	Unitless
ASW2	Near Window 2 in Aluminum	Unitless
ASW3	Near Window 3 in Aluminum	Unitless
ASW4	Near Window 4 in Aluminum	Unitless
ASW5	Near Window 5 in Aluminum	Unitless
ASWCN	Array Induction Wellsite Cartridge Serial Number	Unitless
ASZ	Azimuth Statistics Zoning in HDTPAN	Unitless
ATA1	Amplitude Threshold for Echo 1 Eccentering Correction	Attenuation
ATA2	Amplitude Threshold for Echo 2 Eccentering Correction	Attenuation
ATC	Automatic Temperature Correction	Unitless
ATC0	Alpha Temperature Coefficient 0	Unitless
ATC1	Alpha Temperature Coefficient 1	Unitless
ATC2	Alpha Temperature Coefficient 2	Unitless
ATC3	Alpha Temperature Coefficient 3	Unitless
ATCK	Type of Vertical Average for the CK Channel	Unitless
ATCM	Multiplier of Standard Deviation on Measure of ATC	Unitless
ATCO	Accelerometer Temperature Compensation Option	Unitless
ATCS	Type of Vertical Average for the CS Channel	Unitless
ATEM	Ambient Temperature	Temperature
ATFK	Type of Vertical Average for the FK Channel	Unitless
ATGR_CRC	Averaging Type for GR_CRC	Unitless
ATGR_SIG	Averaging Type for GR_SIG	Unitless
ATHR	Amplitude Threshold for Radius Eccentering Correction	Attenuation
ATIM	Accumulation Time	Minute
ATIN	Amplitude Threshold for Internal Corrosion	Attenuation
ATLL	Type of Vertical Average for the LL Channel	Unitless
ATLS	Type of Vertical Average for the LS Channel	Unitless
ATLU	Type of Vertical Average for the LU Channel	Unitless
ATMC	ARC Gamma Ray Temperature Coefficient Factor	Unitless
ATMD	Mud Attenuation	Attenuation
ATMD_LL	Mud Attenuation Lower Limit	Attenuation
ATMD_MODE	Mud Attenuation Source Mode	Unitless
ATMD_UL	Mud Attenuation Upper Limit	Attenuation
ATMN	Minimum of Automatic Transit Time Scale	Time
ATMT	Attenuation Tolerance Minus	AttenuationPerLength
ATOL	Amplitude Threshold for Hole Detection	Attenuation
ATPT	Attenuation Tolerance Plus	AttenuationPerLength
ATRM	Multiplier of Standard Deviation On Measure of ATR	Unitless
ATRN	ARC Tool Run Number	Unitless
ATRSV	Array Induction Response Set Version for Two ft Resolution	Unitless
ATSE	Array Induction Temperature Selection(Sonde Error Correction)	Unitless
ATSN	ARC Tool Serial Number	Unitless
ATSS	APS Temperature-Pressure-Salinity Correction Switch	Unitless
ATST_LL	Stoneley Attenuation Lower Limit	Attenuation
ATST_UL	Stoneley Attenuation Upper Limit	Attenuation
ATT	Precision DC Amplifier Attenuation Measurement	Unitless
ATTENUATION_EXP	Attenuation exponent for true amplitude recovery	Unitless
ATTY	Array Induction Tool Type (of acquired data)	Unitless
ATU	Type of Vertical Average for the U Channel	Unitless
ATWK	Type of Vertical Average for the WK Channel	Unitless
AUDI	Automatic Shot Detection	Unitless
AUMS	Auxiliary Message Status	Unitless
AURG	Autoranger	Unitless
AUTD	Gold (AU) Tracer Detection Enable Constant	Unitless
AUTHORIZATION_FOR_EXPENDITURE	Identifier of granted or candidate request for authorization to spend money, usually for a specified purpose and amount. Abbreviated AFE	Unitless
AUTOCORR_TIME_WINDOW	Autocorrelation time window duration	Time
AUTOCORR_TYPE	Autocorrelation Type e.g. Time_Window, Time_Window_D_2, Time_Window_In_Sec	Unitless
AUTO_RESET_ENBL	Enable Auto Reset	Unitless
AUTO_RESET_PRES	Auto Reset Pressure Limit	Pressure
AUTO_VSCALE_CHANGE_ENBL	Enable Automatic Vertical Scale Change	Unitless
AUTO_VSCALE_EXPANDED	Automatic Vertical Expanded Scale	Dimensionless
AUTO_VSCALE_NORMAL	Automatic Vertical Normal Scale	Dimensionless
AUTO_VSCALE_TIME	Automatic Vertical Scale Change Time Limit	Time
AUXC	AC AUX Connection	Unitless
AUXV	Value Recommended for AC Aux	ElectricPotential
AVAL	Absent Value	Unitless
AVE0	Averaged Output 0 Name	Unitless
AVE1	Averaged Output 1 Name	Unitless
AVE2	Averaged Output 2 Name	Unitless
AVE3	Averaged Output 3 Name	Unitless
AVE4	Averaged Output 4 Name	Unitless
AVE5	Averaged Output 5 Name	Unitless
AVE6	Averaged Output 6 Name	Unitless
AVE7	Averaged Output 7 Name	Unitless
AVE8	Averaged Output 8 Name	Unitless
AVE9	Averaged Output 9 Name	Unitless
AVER	Averaging Method	Unitless
AVERAGE	Average value of any channel	Unitless
AVETYP	Averaging Type	Unitless
AVG	Average Switches: (0=N,1=Y) - AVG, MLL, PRX, MSF Are Preset To Yes	Unitless
AVG_BOREHOLE_DIAMETER	Average Borehole Diameter	CylinderDiameter
AVG_MODE_CONVERTED_VELOCITY	Average converted-wave velocity from the surface to the reflector. The converted wave velocity is determined from the time taken for the energy to travel in one direction as compressional wave and in the other as shear.	AcousticVelocity
AVG_MUD_RESISTIVITY	Average Mud Resistivity	Resistivity
AVG_PENETRATION_RATE	Average drilling penetration rate (ROP)	DrillbitPenetrationRate
AVG_RESERVOIR_PRESSURE	The average pressure (somewhere in the reservoir) between the borehole pressure and external boundary pressure.	Pressure
AVG_SHEAR_VELOCITY	Average shear wave velocity, from the surface to the reflector. The shear wave velocity is determined from the two-way vertical time taken for the energy to travel to the reflector and back as a shear wave.	AcousticVelocity
AVG_TEMPERATURE	Average Temperature	Temperature
AVG_WEIGHT_ON_BIT	Average "Weight On Bit" (WOB)	HighForce
AVG_WINDOW	Averaging Window Length (0.1 inches)	Unitless
AVMU	Apparent Interval Transit Time of Mud	AcousticSlowness
AVRG_ANT1	Antenna 1 Depth Interval to Average (odd level increments)	Unitless
AVRG_ANT2	Antenna 2 Depth Interval to Average (odd level increments)	Unitless
AVWT	APS Volume Fraction of Water Transform	Unitless
AWARD_DATE	Date lease awarded	Unitless
AWCD	APS Water Volume Casing Inner Diameter	CylinderDiameter
AWCN	Array Induction Wellsite Cartridge Serial Number	Unitless
AWCR	Automatic Wire Connection Resistance Estimation	Unitless
AWMN	Amplitude Color Scale Minimum	Attenuation
AWMX	Amplitude Color Scale Maximum	Attenuation
AWT	Analog Waveform Transmission	Unitless
AWTN	Array Induction Wellsite Transmitter Serial Number	Unitless
AXGD	X-Axis Acceleration Gain Drift	Unitless
AXIAL_LENGTH	The length associated with the longest dimension of an object. This corresponds to the height of a cylinder, or the longest axis of a rectangle.	Length
AXIS	Choice of Component On Which To Pick	Unitless
AXOD	X-Axis Acceleration Offset Drift	Unitless
AXOF	AX Offset	PlaneAngle
AXSF	AX Scale Factor	Unitless
AXSL	PP mV & RMS mV Computation Axis for Seismic Wavefield	Unitless
AYGD	Y-Axis Acceleration Gain Drift	Unitless
AYOD	Y-Axis Acceleration Offset Drift	Unitless
AYOF	AY Offset	PlaneAngle
AYSF	AY Scale Factor	Unitless
AZGD	Z-Axis Acceleration Gain Drift	Unitless
AZIM	Well Section Azimuth	PlaneAngle
AZIMUTH	The horizontal angle specified clockwise from true North. Occasionally azimuth will be specified relative to the South or Magnetic North. Also called True Bearing.	PlaneAngle
AZIM_REF_TYPE	The azimuth reference type is relative to either true north, magnetic north or grid north	Unitless
AZOD	Z-Axis Acceleration Offset Drift	Unitless
AZ_MOD_MRWD	MRWD Azimuthal Acquisition Mode	Unitless
AZ_SMOOTHING_MRWD	MRWD Antenna 2 Azimuthal Smoothing Option	Unitless
A_EPT	EPT zoned value of Archie "A" factor	Unitless
A_ZP	Zoned value of Archie "A" factor	Unitless
B0FS	Static Magnetic Field converted from the Larmor Frequency	MagneticFluxDensity
B0HFS	Static Magnetic Field (Hall probe) during FLID Search	MagneticFluxDensity
B0TFS	Static Magnetic Field inferred from Temperature during LFST Search	MagneticFluxDensity
B0_MC	B0 during Master Calibration	MagneticFluxDensity
B0_TEMP_COEF	Exponential Coefficient for Static B0 from Temperature	Unitless
BACKGROUND_PRESSURE_TREND	Background pressure trend for a horizontal interference test	Unitless
BACK_PRESSURE_DROP	Constant pressure drop on a flowline used mainly to approximate any kind of restriction, choke, nozzle ...	Pressure
BAND	Bandwidth	Frequency
BAR	Barite Mud Coefficient (Ellis Model)	Unitless
BAR1	HNGS Detector 1 Barite Constant	Unitless
BAR2	HNGS Detector 2 Barite Constant	Unitless
BARI	Barite On/Off Switch	Unitless
BARS_CMP_DEL	Time delay to start the CMP-NMO processing	MicroTime
BARS_CMP_DT_SEL	Slowness Selection for CMP-NMO and Stack Depth Section	Unitless
BARS_CMP_DUR	Time duration for the CMP-NMO processing	MicroTime
BARS_CMP_RDS	Receiver Direction Selection for the CMP-NMO and the Stack Depth Section	Unitless
BARS_CMP_WFN	Waveform Normalization Selection for the CMP-NMO and the Stack Depth Section	Unitless
BARS_DS_LL	Stack Depth Section Lower Limit (Top Depth), True Vertical Depth	StandardDepthIndex
BARS_DS_UL	Stack Depth Section Upper Limit (Bottom Depth), True Vertical Depth	StandardDepthIndex
BARS_MTR1	Length for Monopole Transmitter to Receiver 1	Length
BARS_SRC_FRQ	BARS Source Frequency	Frequency
BARS_STACK_INT	Resolution to be processed for the Stack Depth Section	StandardDepthIndex
BARS_VDL_MI	Selection to Display the Mirror Image for the Stack Depth Section	Unitless
BAR_PRE	Estimated Barite Factor	Unitless
BASE_CALIB_POINTS	Calibration point Y coordinates	PhaseShift
BASE_DATE_LOGGED	Logging Date of Base Log	Unitless
BASE_FLUID_TYPE	The type of the base fluid usually used in chemical mixing, such Oil or Water.	Unitless
BASE_FOR_SPACING	A flag that determines which reference along a Borehole will be used to space Boreholes on a Cross-section.	Unitless
BASE_LFRQ	LFRQ of Base Log	Unitless
BASE_PRES_FACTOR	Pressure base factor to correct the basic orifice factor in the orifice equation when the pressure used is not 14.73 psi	Unitless
BASE_TEMP_FACTOR	Base temperature factor to correct the basic orifice factor in the orifice equation when the temperature is not 60 F	Unitless
BASIC_COMPUTE	Basic Computation Option	Unitless
BATTERY_WEIGHT	Battery Weight	Force
BAUD	BAUD Rate	Unitless
BAUD_RATE	The speed at which data are transmitted, different from Bit_Rate due to protocol overhead.	BitRate
BB10_MIST	Borehole Background Window 10	CountRate
BB11_MIST	Borehole Background Window 11	CountRate
BB12_MIST	Borehole Background Window 12	CountRate
BB13_MIST	Borehole Background Window 13	CountRate
BB14_MIST	Borehole Background Window 14	CountRate
BB1_MIST	Borehole Background Window 1	CountRate
BB2_MIST	Borehole Background Window 2	CountRate
BB3_MIST	Borehole Background Window 3	CountRate
BB4_MIST	Borehole Background Window 4	CountRate
BB5_MIST	Borehole Background Window 5	CountRate
BB6_MIST	Borehole Background Window 6	CountRate
BB7_MIST	Borehole Background Window 7	CountRate
BB8_MIST	Borehole Background Window 8	CountRate
BB9_MIST	Borehole Background Window 9	CountRate
BBAI	MIST Borehole Background Accumulation Interval	Unitless
BBSEXP	Exponent in the Brown-Bray-Santarelli Model	Unitless
BBSFAC	Gain in the Brown-Bray-Santarelli Model	Unitless
BBTC	Borehole Background Total Counts	Unitless
BCAZ	Borehole Contribution to the Calcium Yield	Unitless
BCA_ZP	Zoned relative borehole yield for GST Calcium	Unitless
BCDI	Balancing Current Injector for Top Electrode Triplet	Dimensionless
BCHL_ZP	Zoned relative borehole yield for GST Chlorine	Unitless
BCT	Buildup Cutoff Time	Time
BC_PROC_OPT	Data Option for Baseline Correction Processing	Unitless
BDAVM	Multiplier of Standard Deviation on Measure of BDAV	Unitless
BDAZ	User Defined Azimuth for Deep Button Measurement	PlaneAngle
BDP	Bottom Depth of Processing	Length
BDPS	Bulk Density Processing Selector	Unitless
BDSS	Downhole Sensor Source (Bottom Tool)	Unitless
BEAUFORT_SCALE_NUMBER	The Beaufort wind scale is a system used to estimate and report wind speeds when no measuring apparatus is available. It was invented in the early 19th century by Admiral Sir Francis Beaufort of the British Navy as a way to interpret winds from conditions at sea, e.g. 5 on the Beaufort scale corresponds to a wind of 17-21 knots and is defined as "Fresh Breeze: Moderate waves (1.8m), many white horses."	Unitless
BECD	RST Beam Current Set Point	LowCurrent
BEDDING_DISP	Do we display the bedding track ? (1 == Yes, 0 ==No)	Unitless
BED_CHARACTER	The Characteristic given to a Bed or layer (e.g. has sealing characteristic or is probable source rock.)	Unitless
BED_SET_TYPE	The type of bed grouping	Unitless
BEGS	Electrode Group Selector for BCD Electrode Triplet	Dimensionless
BENDING_MOMENT_PER_LENGTH	For a rotating body, the product of force and length of angular displacement normalized for the radius of rotation.	Force
BEND_1_ANGLE	Angle of first bend in equipment item.	PlaneAngle
BEND_1_TO_BOTTOM_CONN	Length from the first bend to the bottom connection of the tool	Length
BEND_2_ANGLE	Angle of second bend in equipment item.	PlaneAngle
BEND_2_TO_BOTTOM_CONN	Length from the second bend to the bottom connection of the tool	Length
BERJ	Bad Echo Rejection	Unitless
BETA	Beta Angle	PlaneAngle
BETA_0	Counterion Conductivity in Sen-Goode-Sibbit model	CounterionConductivity
BF	Bad Finger List	Unitless
BFDN	Base Fluid Density	Density
BFEZ	Borehole Contribution to the Iron Yield	Unitless
BFE_ZP	Zoned relative borehole yield for GST Iron	Unitless
BFFL	Base Fluid Flowrate	Flowrate
BFIN	Best Fit Index	Unitless
BFLAG	Boolean True False Flag	Unitless
BFLOW_FLOWRATES_MODE	User mode in BorFlow Flowrates Solving task. Values: Automatic, Manual, Expert	Unitless
BFLOW_FLOWRATES_OPTIONS	BorFlow flowrates solving processing options. Elements: 1)Standing Water, 2)Standing Oil, 3)Monophasic entries, 4)Crossflow	Unitless
BFLOW_MODE	Global user mode in BorFlow. Values: Automatic, Manual, Expert	Unitless
BFLOW_PDS_FILE	Results tables in PDS format to be included in the report	Unitless
BFM	Borehole Fluid Medium	Unitless
BFN	Name of the File of Breakpoints in Dipmeter Curves	Unitless
BFPM	Base Fluid Relative Permeability	Area
BFT	Temperature of Formation at Bottom	Temperature
BFT1	Back-Flush Timer 1	Time
BFT2	Back-Flush Timer 2	Time
BFTC	Background Filter Time Constant	Time
BFTP	Base Fluid Model	Unitless
BFV_ALBI	Bound Fluid Volume response parameter for Albite	Porosity
BFV_ANHY	Bound Fluid Volume response parameter for Anhydrite	Porosity
BFV_BIOT	Bound Fluid Volume response parameter for Biotite	Porosity
BFV_CALC	Bound Fluid Volume response parameter for Calcite	Porosity
BFV_CARB	Bound Fluid Volume response parameter for Carbonate	Porosity
BFV_CHLO	Bound Fluid Volume response parameter for Chlorite	Porosity
BFV_CLA1	Bound Fluid Volume response parameter for Clay 1	Porosity
BFV_CLA2	Bound Fluid Volume response parameter for Clay 2	Porosity
BFV_COAL	Bound Fluid Volume response parameter for Coal	Porosity
BFV_DOLO	Bound Fluid Volume response parameter for Dolomite	Porosity
BFV_EVAP	Bound Fluid Volume response parameter for Evaporate	Porosity
BFV_FELD	Bound Fluid Volume response parameter for Feldspar	Porosity
BFV_GLAU	Bound Fluid Volume response parameter for Glauconite	Porosity
BFV_GYPS	Bound Fluid Volume response parameter for Gypsum	Porosity
BFV_HALI	Bound Fluid Volume response parameter for Halite	Porosity
BFV_IGNE	Bound Fluid Volume response parameter for Igneous	Porosity
BFV_ILLI	Bound Fluid Volume response parameter for Illite	Porosity
BFV_ISOL	Bound Fluid Volume response parameter for Isolated	Porosity
BFV_KAOL	Bound Fluid Volume response parameter for Kaolinite	Porosity
BFV_META	Bound Fluid Volume response parameter for Metamorphic	Porosity
BFV_MIN	Bound Fluid Volume - Minimum	Porosity
BFV_MONT	Bound Fluid Volume response parameter for Montmorillonite	Porosity
BFV_MUSC	Bound Fluid Volume response parameter for Muscovite	Porosity
BFV_ORTH	Bound Fluid Volume response parameter for Orthoclase	Porosity
BFV_PARA	Bound Fluid Volume response parameter for Parallel	Porosity
BFV_PYRI	Bound Fluid Volume response parameter for Pyrite	Porosity
BFV_QUAR	Bound Fluid Volume response parameter for Quartz	Porosity
BFV_SAND	Bound Fluid Volume response parameter for Sand	Porosity
BFV_SHAL	Bound Fluid Volume response parameter for Shale	Porosity
BFV_SIDE	Bound Fluid Volume response parameter for Siderite	Porosity
BFV_SILT	Bound Fluid Volume response parameter for Silt	Porosity
BFV_SMI1	Bound Fluid Volume response parameter for Special Mineral 1	Porosity
BFV_SMI2	Bound Fluid Volume response parameter for Special Mineral 2	Porosity
BFV_UGAS	Bound Fluid Volume response parameter for Undisturbed Zone Gas	Porosity
BFV_UIWA	Bound Fluid Volume response parameter for Undisturbed Zone Irreducible Water	Porosity
BFV_UNC_WM	Bound Fluid Volume Weight Multiplier Zone Parameter	Unitless
BFV_UNC_ZP	Bound Fluid Volume Uncertainty Zone Parameter	Porosity
BFV_UOIL	Bound Fluid Volume response parameter for Undisturbed Zone Oil	Porosity
BFV_USFL	Bound Fluid Volume response parameter for Undisturbed Zone Special Fluid	Porosity
BFV_UWAT	Bound Fluid Volume response parameter for Undisturbed Zone Water	Porosity
BFV_XBWA	Bound Fluid Volume response parameter for Flushed Zone Bound Water	Porosity
BFV_XGAS	Bound Fluid Volume response parameter for Flushed Zone Gas	Porosity
BFV_XIWA	Bound Fluid Volume response parameter for Flushed Zone Irreducible Water	Porosity
BFV_XOIL	Bound Fluid Volume response parameter for Flushed Zone Oil	Porosity
BFV_XSFL	Bound Fluid Volume response parameter for Flushed Zone Special Fluid	Porosity
BFV_XWAT	Bound Fluid Volume response parameter for Flushed Zone Water	Porosity
BG	Gas Formation Volume Factor, Bg	Unitless
BGAI	Borehole Graphic Angle Index	Unitless
BGAS	Borehole Gas Level for TPHC	CountRate
BGDI	Borehole Graphic Depth Interval	Unitless
BGDM	Borehole Graphic Display Mode	Unitless
BGDZ	Borehole Contribution To the Gadolinium Yield Parameter	Unitless
BGD_ZP	Zoned relative borehole yield for GST Gadolinium	Unitless
BGHW	Borehole Graphic Horizontal Width	Unitless
BGL1	Far Window 1 Background	Unitless
BGL2	Far Window 2 Background	Unitless
BGL3	Far Window 3 Background	Unitless
BGL4	Far Window 4 Background	Unitless
BGL5	Far Window 5 Background	Unitless
BGLITH_LDS	LDS Long-Spaced LITH Window Background Calibration Countrate	CountRate
BGLL	Back Ground of LL Count Rate	Unitless
BGLL_LDS	LDS Long-Spaced LL Window Background Calibration Countrate	CountRate
BGLS	Back Ground of LS Count Rate	Unitless
BGLU	Back Ground of LU Count Rate	Unitless
BGLU_LDS	LDS Long-Spaced LU Window Background Calibration Countrate	CountRate
BGOVRL_LDS	LDS Long-Spaced Overflow Background Calibration Countrate	CountRate
BGOVRS_LDS	LDS Short-Spaced Overflow Background Calibration Countrate	CountRate
BGS1	Near Window 1 Background	Unitless
BGS2	Near Window 2 Background	Unitless
BGS3	Near Window 3 Background	Unitless
BGS4	Near Window 4 Background	Unitless
BGS5	Near Window 5 Background	Unitless
BGSS1_LDS	LDS Short-Spaced SS1 Window Background Calibration Countrate	CountRate
BGSS2_LDS	LDS Short-Spaced SS2 Window Background Calibration Countrate	CountRate
BGSW	Borehole Graphic Switch	Unitless
BGUN	Borehole Graphic Unit	Unitless
BGVS	Borehole Graphic Vertical Scale	Unitless
BHAL	GRA Borehole Aluminum Weight Percent	StandardWeightRatio
BHA_NUMBER	Number assigned to a bottom hole assembly (BHA) at the wellsite	Unitless
BHA_RUN_NUMBER	Number assigned to a bottom hole assembly (BHA) when it is run into the hole	Unitless
BHCC	Switch to enable HALS Borehole Correction	Unitless
BHCL	Bottom Hole Course Length for TVD	Length
BHCM	Multiplier of Standard Deviation for BHC	Unitless
BHCP	Bottom Hole Closure Pressure	Pressure
BHCS	Bottomhole Choke Size	OilfieldGaugeLength
BHDE	Bottom Hole Distance East for TVD	Length
BHDN	Bottom Hole Distance North for TVD	Length
BHDS	Bottom Hole Distance South for TVD	Length
BHDW	Bottom Hole Distance West for TVD	Length
BHF	Borehole Fluid	Unitless
BHFL	Borehole Fluid Type	Unitless
BHK	HNGS Borehole Potassium Correction Concentration	HighConcentration
BHKCOR	Borehole Potassium Correction Switch	Unitless
BHM	Borehole Material	Unitless
BHMD	Bottom Hole Measured Depth for TVD	Length
BHPS	CNL Panel Setting for Bore Hole (0=Automatic Hole Correction)	Unitless
BHS	Borehole Status	Unitless
BHSI	GRA Borehole Fluid Capture Cross-section	NeutronCaptureCrossSection
BHST	Borehole Status: 0 = Open; 1 = Cased	Unitless
BHT	Bottom Hole Temperature	Temperature
BHT_RM	Bottom Hole Temperature (RM)	Temperature
BHYZ	Borehole Contribution to the Hydrogen Yield	Unitless
BHY_ZP	Zoned relative borehole yield for GST Hydrogen	Unitless
BIAS	T2 Bias Constant	Unitless
BID_AMOUNT	Amount of lease bid	Unitless
BID_NUMBER	Bid number assigned by governing agency	Unitless
BILI	Bond Index Level for Zone Isolation	Unitless
BIOTURBATION_TYPE	The type of Bioturbation: the mixing of sediments by burrowing organisms.	Unitless
BIOT_COEFFICIENT	The proportion of fluid pressure in a material which acts to counterbalance overburden pressure. Used in the calculation of net overburden: P_eff = P_overburden - (Biot_Coefficient * P_fluid)	Unitless
BIOT_ZP	Zoned Volume of Biotite	StandardVolumeRatio
BISL	BGT/IIC Resistivity Status Lamps	Unitless
BITACT	Drillbit Action Parameter	Unitless
BITANG	Drillbit Tooth Angle	PlaneAngle
BITCOF	Drillbit Coefficient of Friction	Unitless
BITR	Number of Brine Processing Iterations	Unitless
BITS	Number of Data Bits	Unitless
BIT_BLADED	Is the drillbit bladed (PDC type bit)?	Unitless
BIT_DEPTH	Depth of the drillbit	Length
BIT_END_DEPTH	Ending point in Measured Depth	Length
BIT_GAUGE_LEN	Length of the bit which is the full hole gauge or gauge measured along axis of body	Length
BIT_IADC_BEARING_SEALS	IADC bit dull grading bearing/seals	Unitless
BIT_IADC_CODE	International Association of Drilling Contractor Code for drill bit	Unitless
BIT_IADC_DULL_CHAR	IADC bit dull grading cutting structure dull characteristic	Unitless
BIT_IADC_GAUGE	IADC bit dull grading gauge wear to the nearest (1/16")	Unitless
BIT_IADC_INNER_ROWS	IADC bit dull grading cutting structure inner rows	Unitless
BIT_IADC_LOCATION	IADC bit dull grading cutting structure location	Unitless
BIT_IADC_OTHER_CHAR	IADC bit dull grading remark on other characteristic	Unitless
BIT_IADC_OUTER_ROWS	IADC bit dull grading cutting structure outer rows	Unitless
BIT_IADC_REASON_PULL	IADC bit dull grading remark on the reason pulled	Unitless
BIT_INCR_MD	Bit Measured Depth increment	Length
BIT_K_FACTOR	Bit K factor	Length
BIT_MD	Measured depth of the bit at the time of calculation	Length
BIT_NOZZLE_COUNT	Drill bit nozzle count of the specified drill bit nozzle size	Unitless
BIT_NOZZLE_SIZE	Drill bit nozzle size (1/32")	OilfieldGaugeLength
BIT_NOZZLE_TFA	Total flow area of drill bit nozzle or jet	Area
BIT_NUMBER	Number assigned to a bit at the wellsite inventory	Unitless
BIT_OPERATING_TIME	Operating time of the bit over the reporting period.	DayTime
BIT_PROFILE	Profile of the bit (PDC type bit)	Unitless
BIT_RUN_NUMBER	Number assigned to a bit when it is run into the hole	Unitless
BIT_START_DEPTH	Starting point in Measured Depth	Length
BIT_TBG_BEARING	TBG grading bearing condition	Unitless
BIT_TBG_GAUGE	TBG grading gauge wear to the nearest (1/16")	Unitless
BIT_TBG_TOOTH	TBG grading tooth wear	Unitless
BIT_TYPE	Generic type of the drill bit, such as Roller Cone or PDC	Unitless
BIT_WEAR	Bit wear grading in percentage	Unitless
BIW	First Command Word	Unitless
BKRD	Acid Bank Radius	Length
BKZ	Borehole Contribution To the Potassium Yield Parameter	Unitless
BK_ZP	Zoned relative borehole yield for GST Potassium	Unitless
BL1	Blank Line 1	Unitless
BL2	Blank Line 2	Unitless
BL3	Blank Line 3	Unitless
BL4	Blank Line 4	Unitless
BL5	Blank Line 5	Unitless
BLAD	Blade Size	Length
BLADE_GAUGE_LENGTH	Length of the in-gauge portion of the blade.	ShortLength
BLADE_HEIGHT	Height of blade at gauge from the body of the equipment, such as a stabilizer.	CylinderDiameter
BLADE_LENGTH	Length of blade measured along spiral; used for drill stabilizer blades.	CylinderDiameter
BLADE_SPIRAL	Degree of spiral blade coverage 0, 270, 450, -270. (0-straight blade; Negative-left spiral; Positive-right spiral)	PlaneAngle
BLADE_TO_CONN_2	Distance from blade to Connection 2.	Length
BLADE_WIDTH	Width of the blade at gauge, as used for drill stabilizer blades.	CylinderDiameter
BLF	Flag for Blanking	Unitless
BLI	Bottom Log Interval	StandardDepthIndex
BLI1	Bottom Log Interval 1 - Zoned	Length
BLI2	Bottom Log Interval 2 - Zoned	Length
BLI3	Bottom Log Interval 3 - Zoned	Length
BLI4	Bottom Log Interval 4 - Zoned	Length
BLI5	Bottom Log Interval 5 - Zoned	Length
BLI6	Bottom Log Interval 6 - Zoned	Length
BLI7	Bottom Log Interval 7 - Zoned	Length
BLI8	Bottom Log Interval 8 - Zoned	Length
BLI9	Bottom Log Interval 9 - Zoned	Length
BLOCKING_METHOD_TYPE	Blocking method	Unitless
BLOCK_DEPTH_SHIFT	Uniform depth shift to be applied to output arrays and images	Length
BLOCK_WEIGHT	Block Weight (including the Kelly)	HighForce
BMAVM	Multiplier of Standard Deviation on Measure of BMAV	Unitless
BMAZ	User Defined Azimuth for Medium Button Measurement	PlaneAngle
BMCS	Backup Mode Channel Selection	Unitless
BMKF	Fluid Bulk Modulus - Kf	ElasticModulus
BMKF_MODE	Pore Fluid Modulus Source Mode	Unitless
BMKS	Solid Bulk Modulus - Ks	ElasticModulus
BMKS_MODE	Grain Bulk Modulus Source Mode	Unitless
BMK_ALBI	Bulk Modulus response parameter for Albite	ElasticModulus
BMK_ANHY	Bulk Modulus response parameter for Anhydrite	ElasticModulus
BMK_BIOT	Bulk Modulus response parameter for Biotite	ElasticModulus
BMK_CALC	Bulk Modulus response parameter for Calcite	ElasticModulus
BMK_CARB	Bulk Modulus response parameter for Carbonate	ElasticModulus
BMK_CHLO	Bulk Modulus response parameter for Chlorite	ElasticModulus
BMK_CLA1	Bulk Modulus response parameter for Clay 1	ElasticModulus
BMK_CLA2	Bulk Modulus response parameter for Clay 2	ElasticModulus
BMK_CLAY	Bulk Modulus of Clay	ElasticModulus
BMK_COAL	Bulk Modulus response parameter for Coal	ElasticModulus
BMK_DOLO	Bulk Modulus response parameter for Dolomite	ElasticModulus
BMK_EVAP	Bulk Modulus response parameter for Evaporate	ElasticModulus
BMK_FELD	Bulk Modulus response parameter for Feldspar	ElasticModulus
BMK_GLAU	Bulk Modulus response parameter for Glauconite	ElasticModulus
BMK_GYPS	Bulk Modulus response parameter for Gypsum	ElasticModulus
BMK_HALI	Bulk Modulus response parameter for Halite	ElasticModulus
BMK_IFAC_ZP	Zoned Bulk Modulus Invasion Factor	Unitless
BMK_IGNE	Bulk Modulus response parameter for Igneous	ElasticModulus
BMK_ILLI	Bulk Modulus response parameter for Illite	ElasticModulus
BMK_ISOL	Bulk Modulus response parameter for Isolated	ElasticModulus
BMK_KAOL	Bulk Modulus response parameter for Kaolinite	ElasticModulus
BMK_META	Bulk Modulus response parameter for Metamorphic	ElasticModulus
BMK_MONT	Bulk Modulus response parameter for Montmorillonite	ElasticModulus
BMK_MUSC	Bulk Modulus response parameter for Muscovite	ElasticModulus
BMK_ORTH	Bulk Modulus response parameter for Orthoclase	ElasticModulus
BMK_PARA	Bulk Modulus response parameter for Parallel	ElasticModulus
BMK_PYRI	Bulk Modulus response parameter for Pyrite	ElasticModulus
BMK_QUAR	Bulk Modulus response parameter for Quartz	ElasticModulus
BMK_SAND	Bulk Modulus response parameter for Sand	ElasticModulus
BMK_SHAL	Bulk Modulus response parameter for Shale	ElasticModulus
BMK_SIDE	Bulk Modulus response parameter for Siderite	ElasticModulus
BMK_SILT	Bulk Modulus response parameter for Silt	ElasticModulus
BMK_SMI1	Bulk Modulus response parameter for Special Mineral 1	ElasticModulus
BMK_SMI2	Bulk Modulus response parameter for Special Mineral 2	ElasticModulus
BMK_UGAS	Bulk Modulus response parameter for Undisturbed Zone Gas	ElasticModulus
BMK_UIWA	Bulk Modulus response parameter for Undisturbed Zone Irreducible Water	ElasticModulus
BMK_UNC_WM	Weight Multiplier for the Bulk Modulus Measurement	Unitless
BMK_UNC_ZP	Zoned Uncertainty for the Bulk Modulus Measurement	ElasticModulus
BMK_UOIL	Bulk Modulus response parameter for Undisturbed Zone Oil	ElasticModulus
BMK_USFL	Bulk Modulus response parameter for Undisturbed Zone Special Fluid	ElasticModulus
BMK_UWAT	Bulk Modulus response parameter for Undisturbed Zone Water	ElasticModulus
BMK_XBWA	Bulk Modulus response parameter for Flushed Zone Bound Water	ElasticModulus
BMK_XGAS	Bulk Modulus response parameter for Flushed Zone Gas	ElasticModulus
BMK_XIWA	Bulk Modulus response parameter for Flushed Zone Irreducible Water	ElasticModulus
BMK_XOIL	Bulk Modulus response parameter for Flushed Zone Oil	ElasticModulus
BMK_XSFL	Bulk Modulus response parameter for Flushed Zone Special Fluid	ElasticModulus
BMK_XWAT	Bulk Modulus response parameter for Flushed Zone Water	ElasticModulus
BMOD	DIT-X Processing Switch	Unitless
BNL	Background Noise Level	Unitless
BO	Oil Formation Volume Factor, Bo	Unitless
BOAT_TYPE	Supply boat, tanker, dynamic positioning vehicle etc.	Unitless
BOB_NUMBER	Bob number. The bob is the inner cylinder of a cylindrical rheometer. Each number corresponds to a different size. Standard bob is #1	Unitless
BOC	BO Correlation	Unitless
BODA	Back-off Depth Actual	Length
BODD	Back-off Depth Desired	Length
BODP	Back-off Depth	Length
BOI	Borehole Oil Indicator	Unitless
BOILING_POINT	The temperature at which fractions of a liquid boil.	Temperature
BON	Best-of Number for Spike Identification	Unitless
BOOST_LINE_PUMP_FLOWRATE	Riser Boost line pump flowrate	Flowrate
BORED_FLAG	Flag to indicate that equipment item has been bored.	Unitless
BOREHOLE_COVERAGE	Ratio of the Tool Coverage over the Borehole Circumference	Dimensionless
BOREHOLE_DIAMETER	The inside diameter of a borehole.	CylinderDiameter
BOREHOLE_RADIUS	Radius of the open borehole. Normally taken as the radius of the drillbit.	CylinderDiameter
BORE_COUNT	Number of bores, as in a production packer.	Unitless
BORSCAN_BATCH	Array of strings containing BorScan settings	Unitless
BORSCAN_PARAMETERS	A vector of parameters used in BorScan computations.	Unitless
BOTTOMHOLE_CIRCULATING_PRESSURE	The pressure at the bottom of a borehole during circulation of any fluid.	Pressure
BOTTOMHOLE_CIRCULATING_TEMPERATURE	The bottom hole temperature reached when circulating. Due to the cooling effect of the drill fluid, BHCT is below the BHST.	Temperature
BOTTOMHOLE_END_TYPE	Indicates what limits the total depth (plug back, borehole bottom, bridge plug, sump packer ...)	Unitless
BOTTOMHOLE_FLOWING_PRESSURE	Flowing pressure inside the wellbore at midpoint of the completed interval. Res. Eng. Pwf	Pressure
BOTTOMHOLE_FLOWING_TEMPERATURE	Temperature at the bottom of the well while flowing.	Unitless
BOTTOMHOLE_PRESSURE	The pressure at the bottom of a borehole generally associated with the pore pressure of the formation open to the well.	Pressure
BOTTOMHOLE_SHUTIN_PRESSURE	The pressure at the bottom of a borehole with the well shut in.	Pressure
BOTTOMHOLE_STATIC_TEMPERATURE	The bottom hole equilibrium temperature (when circulation is stopped)	Temperature
BOTTOMHOLE_TEMPERATURE	The temperature at the bottom of a borehole occurring at the time of the activity being performed on the well.	Temperature
BOTTOM_DEPTH	Deepest depth of an interval	StandardDepthIndex
BOTTOM_DIP_NUMBER	Number of Dip (in the Dip Set) at the bottom of the Bed	Unitless
BOTTOM_DISCONTINUITY_TYPE	Type of Discontinuity forming the bottom boundary.	Unitless
BOTTOM_VALUE	Value at the bottom of an interval.	Unitless
BOUND_WATER_CONDUCTIVITY	Conductivity of water bound to clay in the formations.	Conductivity
BOUND_WATER_RESISTIVITY	Resistivity of water bound to clay in the formations.	Resistivity
BOUND_WATER_SATURATION	The extent to which the pore space in a formation contains bound water.	StandardVolumeRatio
BOWL_SPEED	The bowl speed of a centrifuge.	RotationalVelocity
BOX_NUMBER	Number of box in which an item or sample is stored.	Unitless
BP1F	Band-pass Filter Frequency on Acquisition Channel 1	Dimensionless
BP1Q	Band-pass Filter Q-Factor on Acquisition Channel 1	Dimensionless
BP2F	Band-pass Filter Frequency on Acquisition Channel 2	Dimensionless
BP2Q	Band-pass Filter Q-Factor on Acquisition Channel 2	Dimensionless
BP3F	Band-pass Filter Frequency on Acquisition Channel 3	Dimensionless
BP3Q	Band-pass Filter Q-Factor on Acquisition Channel 3	Dimensionless
BPFT	Band-pass Filter Type	Unitless
BPOL	Bottom Polarity	Unitless
BPP	Bubble Point Pressure	Pressure
BPT	Bubble Point Temperature	Temperature
BPUL	Back-off Pull	Mass
BR	Coefficient of VSHALE in the BVIRR Expression in SARLOG	Unitless
BREAKDOWN_PRESSURE	The pressure required to create a hydraulic fracture in an unfractured formation; it is greater than fracture closure pressure except in rare cases, such as very low fracture toughness and very large horizontal stress anisotropy.	Pressure
BRUL	Baseline Removal Upper Limit	MicroTime
BRUL_FT	STC Baseline Removal Upper Limit - Far Transmitter	MicroTime
BRUL_LT	STC Baseline Removal Upper Limit - Lower Transmitter	MicroTime
BRUL_UT	STC Baseline Removal Upper Limit - Upper Transmitter	MicroTime
BS	Bit Size	CylinderDiameter
BS1	Bit Size, Casing String 1	Unitless
BS2	Bit Size, Casing String 2	Unitless
BS3	Bit Size, Casing String 3	Unitless
BS4	Bit Size, Casing String 4	Unitless
BS6	Bit Size Stage 6	Unitless
BSAL	Borehole Salinity	LowConcentration
BSALOPT	RST Borehole Salinity Option	Unitless
BSAL_RM	Borehole Salinity (NaCl-equivalent concentration) used in Recorded Mode	LowConcentration
BSAL_SIG	RST Borehole Salinity Uncertainty	LowConcentration
BSAVM	Multiplier of Standard Deviation on Measure of BSAV	Unitless
BSAZ	User Defined Azimuth for Shallow Button Measurement	PlaneAngle
BSCG	Bottom Sand Detection Tool Count Rate Gain	Unitless
BSCO	Borehole Salinity Correction Option	Unitless
BSD1	Driller Depth, Casing String 1	StandardDepthIndex
BSD2	Driller Depth, Casing String 2	StandardDepthIndex
BSD3	Driller Depth, Casing String 3	StandardDepthIndex
BSD4	Driller Depth, Casing String 4	StandardDepthIndex
BSDF	Bit Size Depth From	Length
BSDI	Bottom Sand Detection Tool Detector Identifier	Unitless
BSDT	Bit Size Depth To	Length
BSFL	RST BSAL Filter Length (number of data frames)	Unitless
BSIG	Sigma Bound Water	NeutronCaptureCrossSection
BSIZ	Borehole Contribution to the Silicon Yield	Unitless
BSI_ZP	Zoned relative borehole yield for GST Silicon	Unitless
BSOL	Basic Solids	Unitless
BSOPT	RST Borehole Size Option	Unitless
BSP	Time Shift Process Flag	Unitless
BSS	Button SET Selection	Unitless
BSSO	Borehole Salinity Source Indicator Flag	Unitless
BSTAC	Nuclear BS Calibration Bg Corrected Temperature Coeff	Unitless
BSTRAP_MODE	Bootstrapping/STC Window Positioning Mode	Unitless
BSTRAP_SEMTHR	Semblance Threshold for Bootstrapping Slowness Update	Unitless
BSTRAP_SLOW	Initial Slowness Estimate for Bootstrapping	AcousticSlowness
BSUL_ZP	Zoned relative borehole yield for GST Sulfur	Unitless
BS_RM	Bit Size (RM)	CylinderDiameter
BTBZ	Borehole Contribution to the Tool Background Yield	Unitless
BTC	Multiplies Break Time to Determine Median Stack Direction	Unitless
BTFS	Buildup Time Function Selection	Unitless
BTHI	Bed Thickness	Unitless
BTIZ	Borehole Contribution To the Titanium Yield Parameter	Unitless
BTI_ZP	Zoned relative borehole yield for GST Titanium	Unitless
BTOR	Back-off Torque	Unitless
BTWS	Theoretical Weight After Back-off	Mass
BUBBLE_FLOW_VELOCITY	The rate at which a fluid bubble, gas or liquid, flows through another fluid, gas or liquid. The Velocity depends on the densities and viscosities of the fluids.	FlowVelocity
BUBBLE_POINT_PRESSURE	The pressure at reservoir temperature at which gas in solution in crude oil comes out of solution as free gas.	Pressure
BUBBLE_POINT_TEMPERATURE	The temperature at reservoir conditions at which gas in solution in crude oil comes out of solution as free gas.	Temperature
BUILDUP_PRESSURE	Pressure recorded in the borehole at downhole conditions during a pressure buildup test.	Pressure
BULI	Business Line	Unitless
BULK_ADDITION_MODE	Describes how the bulk material was added to the mixture.	Unitless
BULK_DENSITY	Density of bulk material, including any void space or other materials contained in the subject volume. In well logging, it is the density of the rock, including fluid-filled pore space.	Density
BULK_MODULUS	The stress-strain ratio under simple hydrostatic pressure. k = Delta P / (Delta V / V), where Delta P, V denotes the change in Pressure and Volume.	ElasticModulus
BULL	Bullet Type	Unitless
BURNER_HEAD_COUNT	Number of heads of the burner (conventionally, 3,4 or 6)	Unitless
BUSINESS_ASSOCIATE_JOB_TITLE	The assignment of an administrative job title to a business associate in the context of a business association	Unitless
BUTTONS_COMPUTE	Buttons Computation Option	Unitless
BUTTON_IMP_FACTOR	Button impedance factor	Resistivity
BVCW	Bulk Volume of Irreducible Water in a Clean Wet Zone	Unitless
BVEL	Break Velocity for VSP/WST Window Computation	AcousticVelocity
BVIRR	Bulk Volume of Irreducible Water	StandardVolumeRatio
BVN	Bubble Velocity Number	Unitless
BVWI	Bulk Volume of Water Irreducible	Porosity
BW	Water Formation Volume Factor, Bw	Unitless
BWC	Bandwidth Control of Spectrum Analyzer	Unitless
BWD	Bound Water Density	Density
BWHI	Bound Water Hydrogen Index	Unitless
BWLW	Back-off Window Lower Width (displacement below BODD)	Length
BWS	Bound Water Salinity	Unitless
BWUW	Back-off Window Upper Width (displacement above BODD)	Length
C01	Comment 1	Unitless
C02	COMMENT 2	Unitless
C03	COMMENT 3	Unitless
C04	COMMENT 4	Unitless
C05	COMMENT 5	Unitless
C06	COMMENT 6	Unitless
C07	COMMENT 7	Unitless
C08	COMMENT 8	Unitless
C09	COMMENT 9	Unitless
C1	C1	Unitless
C10	COMMENT 10	Unitless
C100	COMMENT 100	Unitless
C11	COMMENT 11	Unitless
C12	COMMENT 12	Unitless
C13	COMMENT 13	Unitless
C14	COMMENT 14	Unitless
C15	COMMENT 15	Unitless
C16	COMMENT 16	Unitless
C17	COMMENT 17	Unitless
C18	COMMENT 18	Unitless
C19	COMMENT 19	Unitless
C1CH	High Frequency Amplitude Ratio Constant 1 from Calibration Phase	Unitless
C1CL	Low Frequency Amplitude Ratio Constant 1 from Calibration Phase	Unitless
C1CM	Medium Frequency Amplitude Ratio Constant 1 from Calibration Phase	Unitless
C1R1	STC Peak Coherence, Receiver Array - Lower Dipole Mode	Unitless
C1R2	STC Peak Coherence, Receiver Array - Upper Dipole Mode	Unitless
C1R3	STC Peak Coherence, Receiver Array - Stoneley Mode	Unitless
C1R4	STC Peak Coherence, Receiver Array - P & S Mode	Unitless
C1T1	STC Peak Coherence, Transmitter Array - Lower Dipole Mode	Unitless
C1T2	STC Peak Coherence, Transmitter Array - Upper Dipole Mode	Unitless
C1T3	STC Peak Coherence, Transmitter Array - Stoneley Mode	Unitless
C1T4	STC Peak Coherence, Transmitter Array - P & S Mode	Unitless
C1V	Pretest Chamber 1 Volume	SmallVolume
C2	C2	Unitless
C20	COMMENT 20	Unitless
C21	COMMENT 21	Unitless
C22	COMMENT 22	Unitless
C23	COMMENT 23	Unitless
C24	COMMENT 24	Unitless
C25	COMMENT 25	Unitless
C26	COMMENT 26	Unitless
C27	COMMENT 27	Unitless
C28	COMMENT 28	Unitless
C29	COMMENT 29	Unitless
C2CH	High Frequency Amplitude Ratio Constant 2 from Calibration Phase	Unitless
C2CL	Low Frequency Amplitude Ratio Constant 2 from Calibration Phase	Unitless
C2CM	Medium Frequency Amplitude Ratio Constant 2 from Calibration Phase	Unitless
C2H6_CONCENTRATION	Concentration of C2H6 by volume. Typical value in natural gas 6%.	Percent
C2R1	STC Energy Peak Coherence, Receiver Array - Lower Dipole Mode	Unitless
C2R2	STC Energy Peak Coherence, Receiver Array - Upper Dipole Mode	Unitless
C2R3	STC Energy Peak Coherence, Receiver Array - Stoneley Mode	Unitless
C2R4	STC Energy Peak Coherence, Receiver Array - P & S Mode	Unitless
C2T1	STC Energy Peak Coherence, Transmitter Array - Lower Dipole Mode	Unitless
C2T2	STC Energy Peak Coherence, Transmitter Array - Upper Dipole Mode	Unitless
C2T3	STC Energy Peak Coherence, Transmitter Array - Stoneley Mode	Unitless
C2T4	STC Energy Peak Coherence, Transmitter Array - P & S Mode	Unitless
C2V	Pretest Chamber 2 Volume	SmallVolume
C3	C3	Unitless
C30	COMMENT 30	Unitless
C31	COMMENT 31	Unitless
C32	COMMENT 32	Unitless
C33	COMMENT 33	Unitless
C34	COMMENT 34	Unitless
C35	COMMENT 35	Unitless
C36	COMMENT 36	Unitless
C37	COMMENT 37	Unitless
C38	COMMENT 38	Unitless
C39	COMMENT 39	Unitless
C3H8_CONCENTRATION	Concentration of Propane (C3H8); typical volume concentration in natural gas is 2%.	Percent
C40	COMMENT 40	Unitless
C41	COMMENT 41	Unitless
C42	COMMENT 42	Unitless
C43	COMMENT 43	Unitless
C44	COMMENT 44	Unitless
C45	COMMENT 45	Unitless
C46	COMMENT 46	Unitless
C47	COMMENT 47	Unitless
C48	COMMENT 48	Unitless
C49	COMMENT 49	Unitless
C4H10_CONCENTRATION	Concentration of Butane (C4H10).	Percent
C50	COMMENT 50	Unitless
C51	COMMENT 51	Unitless
C52	COMMENT 52	Unitless
C53	COMMENT 53	Unitless
C54	COMMENT 54	Unitless
C55	COMMENT 55	Unitless
C56	COMMENT 56	Unitless
C57	COMMENT 57	Unitless
C58	COMMENT 58	Unitless
C59	COMMENT 59	Unitless
C5H12_CONCENTRATION	Concentration of Pentane (n-C5H12).	Percent
C60	COMMENT 60	Unitless
C61	COMMENT 61	Unitless
C62	COMMENT 62	Unitless
C63	COMMENT 63	Unitless
C64	COMMENT 64	Unitless
C65	COMMENT 65	Unitless
C66	COMMENT 66	Unitless
C67	COMMENT 67	Unitless
C68	COMMENT 68	Unitless
C69	COMMENT 69	Unitless
C6H14_CONCENTRATION	Concentration of Hexane (C6H14); typical volume concentration in natural gas is 0.3%.	Percent
C70	COMMENT 70	Unitless
C71	COMMENT 71	Unitless
C72	COMMENT 72	Unitless
C73	COMMENT 73	Unitless
C74	COMMENT 74	Unitless
C75	COMMENT 75	Unitless
C76	COMMENT 76	Unitless
C77	COMMENT 77	Unitless
C78	COMMENT 78	Unitless
C79	COMMENT 79	Unitless
C7H16_CONCENTRATION	Concentration of Heptane (C7H16)	Percent
C7PLUS_CONCENTRATION	Concentration of Heptane and hydrocarbons heavier than Heptane; typical volume concentration in natural gas is 0.5%	Percent
C80	COMMENT 80	Unitless
C81	COMMENT 81	Unitless
C82	COMMENT 82	Unitless
C83	COMMENT 83	Unitless
C84	COMMENT 84	Unitless
C85	COMMENT 85	Unitless
C86	COMMENT 86	Unitless
C87	COMMENT 87	Unitless
C88	COMMENT 88	Unitless
C89	COMMENT 89	Unitless
C90	COMMENT 90	Unitless
C91	COMMENT 91	Unitless
C92	COMMENT 92	Unitless
C93	COMMENT 93	Unitless
C94	COMMENT 94	Unitless
C95	COMMENT 95	Unitless
C96	COMMENT 96	Unitless
C97	COMMENT 97	Unitless
C98	COMMENT 98	Unitless
C99	COMMENT 99	Unitless
CABL	Cable Type	Unitless
CABLE_SPEED	Cable speed, generally measured at the surface as an approximation of tool speed.	CableSpeed
CACL2_CONCENTRATION	CaCl2 concentration.	MilligramPerLiter
CACN	Corrected Amplitude Color scale Minimum	Attenuation
CACX	Corrected Amplitude Color scale Maximum	Attenuation
CAD1	Cement Additives 1	Unitless
CADD	Cement Additives	Unitless
CADT	Casing Depth To	Length
CAG	CITA Amplitude Gain	Unitless
CAGN	Amplifier Coarse Gain	Dimensionless
CAGT	CCL Automatic Gain Threshold	CableSpeed
CAGW	CCL Automatic Gain Window	Length
CALCIUM_CONCENTRATION	Calcium concentration (Water Based Mud and water phase for Oil Based Mud)	MilligramPerLiter
CALC_ZP	Zoned Volume of Calcite	StandardVolumeRatio
CALIBRATION_COEFFICIENT_CODE	Calibration coefficient code for calibration performed with pressure sensor	Unitless
CALIBRATION_DATE	The date of calibration for the equipment	Unitless
CALIB_STEP_CYCLES	Number of Sinewave Cycles for Calibrate Step	Dimensionless
CALIB_TEMP_RANGE	Calibration Temperature Range	Dimensionless
CALI_ANGLE	Spatial angles of each caliper channel	PlaneAngle
CALI_COMPUTE	Caliper Computation Option	Unitless
CALI_OFFSET	Offsets of each Caliper channel computed from statistical histogram	CylinderDiameter
CALMOD	Calibration Mode	Unitless
CALSTAT	Calibration Status	Unitless
CALTEMP	Calibration Temperature	Unitless
CAMI	Caliper Minimum Opening	CylinderDiameter
CAMX	Caliper Maximum Opening	CylinderDiameter
CANG	Correlation Search Angle (SHDT)	Unitless
CAPACITANCE	The ratio of charge (Q in coulombs) on a capacitor to the potential across it (V in volts) yields the Capacitance (C in Farads).	Capacitance
CAPILLARY_NUMBER	The ratio of capillary to viscous forces on fluids in a porous media.	Unitless
CAPILLARY_PRESSURE	The difference in pressure between two phases, air fluid, gas fluid or between two fluids, measured at points of the interconnected phases.	Pressure
CAPILLARY_PRESSURE_FUNCTION	Name of the function used to represent capillary pressure.	Unitless
CAPILLARY_PRESSURE_FUNCTION_COEFF	Coefficients used in the capillary pressure function.	Unitless
CAPILLARY_TRANSITION_ZONE_HEIGHT	The vertical interval height that describes the transition between two different fluid phases in a porous media. This transition is caused by changes in saturation dependent capillary forces in equilibrium with gravitational forces.	Length
CAPT	Attenuation/Propagation Correlation Tolerance	Unitless
CAP_ANT1	Antenna 1 Total Line & Antenna Tuned Capacitance with TW=0	Picofarad
CAP_ANT2	Antenna 2 Total Line & Antenna Tuned Capacitance with TW=0	Picofarad
CARB_ZP	Zoned Volume of Carbonate	StandardVolumeRatio
CASD	Casing Diameter	CylinderDiameter
CASE	Casing String	Unitless
CASF	Label Casing Function - Monopole P&S	Unitless
CASG	Casing Grade	Unitless
CASING_DRAG_FACT	The casing drag (axial) factor	Unitless
CASING_FRICTION_FACT	The casing friction (rotating) factor	Unitless
CASING_PIPE_GRADE	Casing pipe grade	Unitless
CASING_ROTATION_FRICTION_COEFFICIENT	Friction coefficient due to rotation between casing and other surface (e.g. drill string).	Unitless
CASING_SHOE_DEPTH	Casing shoe depth	Length
CASING_SLIDING_FRICTION_COEFFICIENT	Friction coefficient due to sliding between casing and other surface (e.g. drill string), when only sliding motion is present	Unitless
CASING_TRANSLATION_FRICTION_COEFFICIENT	Linear component of the friction coefficient between casing and drill string during an helical movement, e.g., reaming mode	Unitless
CASING_TYPE	Generic casing type such as riser, conductor pipe, casing, liner, production casing	Unitless
CASN	Casing String Number	Unitless
CASP	Continuous Abort-Select Pause time	Time
CASS	Casing Shoe	StandardDepthIndex
CASSON_PLASTIC_VISCOSITY	Measure of the internal resistance to fluid flow attributable to the amount, type, and size of solids present in a given fluid. The Casson model equation is: SQRT(Shear_Stress) = SQRT(Yield_Stress) + SQRT(Plastic_Viscosity X Shear_Rate)	DynamicViscosity
CASSON_YIELD_STRESS	Resistance to initial flow; the stress required to start fluid movement. The Casson model equation is: SQRT(Shear_Stress) = SQRT(Yield_Stress) + SQRT(Plastic_Viscosity X Shear_Rate)	ShearStress
CASW	Casing Weight	MassPerLength
CATION_CONCENTRATION	The concentration of cations, the positively charged particles, in the solution of an electrolyte.	CationConcentration
CATION_EXCHANGE_CAPACITY	A measure of the extent to which a substance will supply exchange cations.	CationExchangeCapacity
CAWL	Cable weight per length	MassPerLength
CB3D	SCMT CBL 3 ft Peak Detection Mode	Unitless
CB3G	CBL 3 ft T0_Delay or Noise Gate	MicroTime
CB3T	CBL 3 ft Peak Detection Threshold	LowElectricPotential
CB5D	SCMT CBL 5 ft Peak Detection Mode	Unitless
CB5G	CBL 5 ft T0_Delay or Noise Gate	MicroTime
CB5T	CBL 5 ft Peak Detection Threshold	LowElectricPotential
CBAF	CBL Adjustment Factor	Unitless
CBAR	Constant Barite	Unitless
CBCF	CBL Correction Factor	Unitless
CBD	Casing Bottom (Driller)	Length
CBD1	Casing Bottom 1 (Driller)	StandardDepthIndex
CBD2	Casing Bottom 2 (Driller)	StandardDepthIndex
CBD3	Casing Bottom 3 (Driller)	StandardDepthIndex
CBD4	Casing Bottom 4 (Driller)	StandardDepthIndex
CBDR	Casing Bottom (Driller)	Length
CBL	Cement Bond Log Amplitude	ElectricPotential
CBL1	Casing Bottom 1 (Logger)	StandardDepthIndex
CBL2	Casing Bottom 2 (Logger)	StandardDepthIndex
CBL3	Casing Bottom 3 (Logger)	StandardDepthIndex
CBL4	Casing Bottom 4 (Logger)	StandardDepthIndex
CBLG	CBL Gate Width	Time
CBLO	Casing Bottom (Logger)	Length
CBLS	CBL Source	Unitless
CBO	Code for OIL Formation Volume Factor Correlation	Unitless
CBPP	Continuous Base Polarization Period	ShortTime
CBW	Conductivity of Bound Water for Dual-Water	Conductivity
CBWA	Conductivity of Bound Water Apparent	Conductivity
CBWA_CHLO	Conductivity of bound water for Chlorite	Conductivity
CBWA_CLA1	Conductivity of bound water for Clay 1	Conductivity
CBWA_CLA2	Conductivity of bound water for Clay 2	Conductivity
CBWA_GLAU	Conductivity of bound water for Glauconite	Conductivity
CBWA_ILLI	Conductivity of bound water for Illite	Conductivity
CBWA_KAOL	Conductivity of bound water for Kaolinite	Conductivity
CBWA_MONT	Conductivity of bound water for Montmorillonite	Conductivity
CCAT	User-Defined Criterion Category (Fracture Detection)	Unitless
CCCO	Casing & Cement Thickness Correction Option	Unitless
CCCR	Critical Current for Casing Resistance	ElectricCurrent
CCDI	Casing Collar Detection Interval	Length
CCDL	Casing Collar Depth Listing	Unitless
CCE	Coef. Relative to Compressional Energy Used in Fracture Detection	Unitless
CCLD	CCL reset delay	Length
CCLG	Casing Collar Locator Gain	Unitless
CCLR	Casing Collar Logging Return	Unitless
CCLS	Casing Collar Locator Selector	Unitless
CCLT	CCL Detection Level	ElectricPotential
CCLW	Casing Collar Logging Wire	Unitless
CCMD	Continuous Command	Unitless
CCON	Carbon Concentration (Avogadro Number per cc) of A Substance	Unitless
CCOR_MODE	Crosscorrelation Mode	Unitless
CCOR_OPT	Crosscorrelation criteria	Unitless
CCRT	Continuous Cycle RepeaTime Multiplier	Unitless
CCTU	Calibration Coefficients Temperature Units	Unitless
CCW1	Casing Weight 1 - From CONS Table - Alpha	Unitless
CD	Casing Shoe Depth	Length
CDAT	Calibration Date	Unitless
CDBF	Carbon Density of Bound Fluid	Unitless
CDEN	Cement Density	Density
CDEP	Current Depth for Shooting	StandardDepthIndex
CDF	Casing Depth From	Length
CDGS	CCL Downhole Gain Selection	Unitless
CDI	Casing Diameter, Internal (for Display on Producibility Output)	Length
CDIA	Casing Outer Diameter	CylinderDiameter
CDLI	CCL Delta Limit	ElectricPotential
CDLY	Calibration Delay Time	Time
CDMS	CCL Downhole Mode Selection	Unitless
CDO	Carbon Density of Oil	Unitless
CDOF	CCL Downhole Offset	ElectricPotential
CDOS	CCL Downhole Offset Selection	Unitless
CDP	Common Depth Point	Unitless
CDPM	Casing Distribution Peak Minimum	Unitless
CDPS	Casing Distribution Population Size	Unitless
CDPTA_ISOL	DPT Conductivity response parameter for Parallel	Conductivity
CDPTA_UIWA	DPT Conductivity response parameter for Undisturbed Zone Irreducible Water	Conductivity
CDPTA_USFL	DPT Conductivity response parameter for Undisturbed Zone Special Fluid	Conductivity
CDPTA_UWAT	DPT Conductivity response parameter for Undisturbed Zone Water	Conductivity
CDRS	CCL Downhole Sample Rate Selection	Unitless
CDSE	Corrected Density Selector	Unitless
CDT	Casing Depth To	StandardDepthIndex
CDTM	The error threshold of DTMUD computation	AcousticSlowness
CDTS	Correction for Delta-T Shale, Empirical	AcousticSlowness
CDTST	The error threshold of DTSTE computation	AcousticSlowness
CDUN	Curves Unit Declared in Presentation Manager	Dimensionless
CDV	Density Value for Carbon as Used in Coal Determination	Density
CD_ANGLE_BETWEEN_FAULTS	Angle between two faults (using Convolution Derivative)	PlaneAngle
CD_DISTANCE_TO_FAULT	Distance from sealing fault to well (using Convolution Derivative)	Length
CD_EXTRAPOLATED_PRESSURE	Extrapolated Pressure from infinite-Acting Analysis (using Convolution Derivative)	PressurePerTime
CD_FAULT_TO_WELL_ANGLE	Fault to well angle (using Convolution Derivative)	PlaneAngle
CD_GEOMETRIC_SKIN_FACTOR_LPR	Geometric skin factor from late pseudo radial flow analysis (using Convolution Derivative)	Unitless
CD_INTERPOROSITY_FLOW_COEFFICIENT	Dual Porosity Interporosity Flow Coefficient (using Convolution Derivative)	Unitless
CD_MECHANICAL_SKIN_FACTOR_LPR	Mechanical skin factor from late pseudo radial flow analysis (using Convolution Derivative)	Unitless
CD_MECHANICAL_SKIN_LT	Mechanical skin from late time analysis (using Convolution Derivative)	Unitless
CD_PERMEABILITY	Permeability (using Convolution Derivative)	Permeability
CD_PERMEABILITY_THICKNESS	Permeability thickness product (using Convolution Derivative)	IntegratedPermeability
CD_SKIN_FACTOR_EPR	Skin factor from early pseudo radial flow analysis (using Convolution Derivative)	Unitless
CD_SKIN_FACTOR_LPR	Skin factor from late pseudo radial flow analysis (using Convolution Derivative)	Unitless
CD_SQRT_KX_KY_LPR	Square root Kx.Ky product (using Convolution Derivative)	Permeability
CD_SQRT_KY_KZ_EPR	Square root Ky.Kz product (using Convolution Derivative)	Permeability
CD_STANDOFF	Well standoff to reservoir bottom (using Convolution Derivative)	Length
CD_STORATIVITY_RATIO	Dual Porosity Storativity Ratio (using Convolution Derivative)	Unitless
CD_TOTAL_SKIN_FACTOR	Skin factor (using Convolution Derivative)	Unitless
CD_VERTICAL_PERMEABILITY	Permeability in Z direction (using Convolution Derivative)	Permeability
CD_WELLBORE_STORAGE	Wellbore storage coefficient (using Convolution Derivative)	VolumePerPressure
CD_X_DIRECTION_PERMEABILITY	Permeability in X direction (using Convolution Derivative)	Permeability
CD_Y_DIRECTION_PERMEABILITY	Permeability in Y direction (using Convolution Derivative)	Permeability
CE2S	Wellbore Storage exp(2*Skin)	Unitless
CECA	Cation Exchange Capacity	Unitless
CECA_CHLO	Cation Exchange Capacity parameter for Chlorite	CationExchangeCapacity
CECA_CLA1	Cation Exchange Capacity parameter for Clay 1	CationExchangeCapacity
CECA_CLA2	Cation Exchange Capacity parameter for Clay 2	CationExchangeCapacity
CECA_GLAU	Cation Exchange Capacity parameter for Glauconite	CationExchangeCapacity
CECA_ILLI	Cation Exchange Capacity parameter for Illite	CationExchangeCapacity
CECA_KAOL	Cation Exchange Capacity parameter for Kaolinite	CationExchangeCapacity
CECA_MONT	Cation Exchange Capacity parameter for Montmorillonite	CationExchangeCapacity
CECG	CITA Eddy Current Gain	Unitless
CECM	Low Frequency Amplitude Ratio Constant from Cal.	Unitless
CECZ	Cation Exchange Capacity	CationExchangeCapacity
CEEC	Cement Evaluation Electronic Cartridge Type	Unitless
CEFL	Centralized Flag	Unitless
CEMD	Calibration Event Marker Destination	Unitless
CEMENT_SHEATH_THICKNESS	Thickness of the cement sheath between casing and borehole wall.	CylinderDiameter
CENFRQ	Center frequency	Frequency
CENFRQ_MODE	Center Frequency Source Mode	Unitless
CENTRALIZER_COUNT_PER_JOINT	Number of centralizers per joint, e.g. 2 per joint.	Unitless
CENTRALIZER_TEST_TYPE	The type of a Centralizer Test used to test a centralizer, usually during any well operation.	Unitless
CENTRAL_DIP	Initial dip around which migration is performed	PlaneAngle
CENTRAL_DIP_AZIMUTH	Azimuth of initial dip around which migration is performed	PlaneAngle
CENTRAL_INCLINATION	Inclination of initial dip around which migration is performed	PlaneAngle
CENTRAL_LINE_BEARING	Azimuth of central line of projection.	PlaneAngle
CENTRAL_LINE_PT1_LATITUDE	Latitude of first point on central line of projection.	Latitude
CENTRAL_LINE_PT1_LONGITUDE	Longitude of first point on central line of projection.	Longitude
CENTRAL_LINE_PT2_LATITUDE	Latitude of second point on central line of projection.	Latitude
CENTRAL_LINE_PT2_LONGITUDE	Longitude of second point on central line of projection.	Longitude
CENTRAL_MERIDIAN	The meridian on a graticule that is the axis of symmetry for the geometric properties of the graticule displayed on a map projection.	Longitude
CENTRIFUGE_SPEED	The bowl speed of a centrifuge.	RotationalVelocity
CER0	Energy Peak Coherence, Receiver Array - Stoneley Mode	Unitless
CER1	Energy Peak Coherence Receiver Array - Lower Dipole Mode	Unitless
CER2	Energy Peak Coherence, Receiver Array - Upper Dipole Mode	Unitless
CER3	Energy Peak Coherence, Receiver Array - Stoneley Mode	Unitless
CERI	Command Error Report Interval	Time
CERP	Energy Peak Coherence, Receiver Array - P & S Comp	Unitless
CERS	Energy Peak Coherence, Receiver Array - P & S Shear	Unitless
CET0	Energy Peak Coherence, Transmitter Array - Stoneley Mode	Unitless
CET1	Energy Peak Coherence, Transmitter Array - Lower Dipole Mode	Unitless
CET2	Energy Peak Coherence, Transmitter Array - Upper Dipole Mode	Unitless
CET3	Energy Peak Coherence, Transmitter Array - Stoneley Mode	Unitless
CETP	Energy Peak Coherence, Transmitter Array - P & S Comp	Unitless
CETS	Cement Evaluation Tool Sonde Type	Unitless
CEXP	Coloration Exponent	Unitless
CF1T	Compact Flowmeter 1 Type	Unitless
CF2T	Compact Flowmeter 2 Type	Unitless
CFCI	Compressibility Factor Correlation Index	Unitless
CFCV	Controlled Flow Adapter Chamber Volume	SmallVolume
CFF	Compressibility of Formation Fluid	Unitless
CFL	Cement Fluid Loss	SmallVolume
CFN	Correlation-Link File Name	Unitless
CFRT_CALIB_01	Calibration Vector Parameter at EFR 0.25 Hz	Dimensionless
CFRT_CALIB_02	Calibration Vector Parameter at EFR 0.50 Hz	Dimensionless
CFRT_CALIB_03	Calibration Vector Parameter at EFR 0.83 Hz	Dimensionless
CFRT_CALIB_04	Calibration Vector Parameter at EFR 1.00 Hz	Dimensionless
CFRT_CALIB_05	Calibration Vector Parameter at EFR 1.25 Hz	Dimensionless
CFRT_CALIB_06	Calibration Vector Parameter at EFR 1.67 Hz	Dimensionless
CFRT_CALIB_07	Calibration Vector Parameter at EFR 2.00 Hz	Dimensionless
CFRT_CALIB_08	Calibration Vector Parameter at EFR 2.50 Hz	Dimensionless
CFRT_CALIB_09	Calibration Vector Parameter at EFR 3.34 Hz	Dimensionless
CFRT_CALIB_10	Calibration Vector Parameter at EFR 4.01 Hz	Dimensionless
CFRT_CALIB_11	Calibration Vector Parameter at EFR 5.01 Hz	Dimensionless
CFRT_CALIB_12	Calibration Vector Parameter at EFR 6.68 Hz	Dimensionless
CFRT_CALIB_13	Calibration Vector Parameter at EFR 8.01 Hz	Dimensionless
CFRT_CALIB_14	Calibration Vector Parameter at EFR 10.0 Hz	Dimensionless
CFRT_VERB	CFRT Screen Verbosity	Dimensionless
CFST	Central Frequency of the Stoneley Wave	Frequency
CFXO	Water Based Mud Coefficient, used to estimate Water Based Mud invasion when no Rxo.	Unitless
CG	Gas Compressibility	Unitless
CGA0	Correction for Gradio Coefficient GA0	Unitless
CGB0	Correction for Gradio Coefficient GB0	Unitless
CGCA	Correction for Gradio Coefficient (A)	Unitless
CGCB	Correction for Gradio Coefficient (B)	Unitless
CGDF	Correct Gradio for Deviation Flag	Unitless
CGFF	Correct Gradio for Friction Flag	Unitless
CGM	Channel Grouping Mode	Unitless
CGMI	Spectro Computed Gamma Ray Minimum	APIGammaRay
CGNB	Caliper Brine Gain	Unitless
CGNL	Caliper Long Spacing Gain	Unitless
CGNS	Caliper Short Spacing Gain	Unitless
CGPF	CORBAN Graphic Presentation Flag for LCVOT	Unitless
CGRA	Gas Gravity	Unitless
CGSH	Spectro Computed Gamma Ray Shale	APIGammaRay
CH1	Name of Channel 1 for Unlabeled Files	Unitless
CH10	Name of Channel 10 for Unlabeled Files	Unitless
CH11	Name of Channel 11 for Unlabeled Files	Unitless
CH12	Name of Channel 12 for Unlabeled Files	Unitless
CH13	Name of Channel 13 for Unlabeled Files	Unitless
CH14	Name of Channel 14 for Unlabeled Files	Unitless
CH15	Name of Channel 15 for Unlabeled Files	Unitless
CH16	Name of Channel 16 for Unlabeled Files	Unitless
CH17	Name of Channel 17 for Unlabeled Files	Unitless
CH18	Name of Channel 18 for Unlabeled Files	Unitless
CH19	Name of Channel 19 for Unlabeled Files	Unitless
CH2	Name of Channel 2 for Unlabeled Files	Unitless
CH20	Name of Channel 20 for Unlabeled Files	Unitless
CH21	Name of Channel 21 for Unlabeled Files	Unitless
CH22	Name of Channel 22 for Unlabeled Files	Unitless
CH23	Name of Channel 23 for Unlabeled Files	Unitless
CH24	Name of Channel 24 for Unlabeled Files	Unitless
CH25	Name of Channel 25 for Unlabeled Files	Unitless
CH26	Name of Channel 26 for Unlabeled Files	Unitless
CH27	Name of Channel 27 for Unlabeled Files	Unitless
CH28	Name of Channel 28 for Unlabeled Files	Unitless
CH29	Name of Channel 29 for Unlabeled Files	Unitless
CH3	Name of Channel 3 for Unlabeled Files	Unitless
CH30	Name of Channel 30 for Unlabeled Files	Unitless
CH31	Name of Channel 31 for Unlabeled Files	Unitless
CH32	Name of Channel 32 for Unlabeled Files	Unitless
CH33	Name of Channel 33 for Unlabeled Files	Unitless
CH34	Name of Channel 34 for Unlabeled Files	Unitless
CH35	Name of Channel 35 for Unlabeled Files	Unitless
CH36	Name of Channel 36 for Unlabeled Files	Unitless
CH37	Name of Channel 37 for Unlabeled Files	Unitless
CH38	Name of Channel 38 for Unlabeled Files	Unitless
CH39	Name of Channel 39 for Unlabeled Files	Unitless
CH4	Name of Channel 4 for Unlabeled Files	Unitless
CH40	Name of Channel 40 for Unlabeled Files	Unitless
CH41	Name of Channel 41 for Unlabeled Files	Unitless
CH42	Name of Channel 42 for Unlabeled Files	Unitless
CH43	Name of Channel 43 for Unlabeled Files	Unitless
CH44	Name of Channel 44 for Unlabeled Files	Unitless
CH45	Name of Channel 45 for Unlabeled Files	Unitless
CH46	Name of Channel 46 for Unlabeled Files	Unitless
CH47	Name of Channel 47 for Unlabeled Files	Unitless
CH48	Name of Channel 48 for Unlabeled Files	Unitless
CH49	Name of Channel 49 for Unlabeled Files	Unitless
CH4_CONCENTRATION	Concentration of Methane (CH4); typical volume concentration in natural gas is 85%.	Percent
CH5	Name of Channel 5 for Unlabeled Files	Unitless
CH50	Name of Channel 50 for Unlabeled Files	Unitless
CH51	Name of Channel 51 for Unlabeled Files	Unitless
CH52	Name of Channel 52 for Unlabeled Files	Unitless
CH53	Name of Channel 53 for Unlabeled Files	Unitless
CH54	Name of Channel 54 for Unlabeled Files	Unitless
CH55	Name of Channel 55 for Unlabeled Files	Unitless
CH56	Name of Channel 56 for Unlabeled Files	Unitless
CH57	Name of Channel 57 for Unlabeled Files	Unitless
CH58	Name of Channel 58 for Unlabeled Files	Unitless
CH59	Name of Channel 59 for Unlabeled Files	Unitless
CH6	Name of Channel 6 for Unlabeled Files	Unitless
CH60	Name of Channel 60 for Unlabeled Files	Unitless
CH7	Name of Channel 7 for Unlabeled Files	Unitless
CH8	Name of Channel 8 for Unlabeled Files	Unitless
CH9	Name of Channel 9 for Unlabeled Files	Unitless
CHAN	Mode Selection Channel	Unitless
CHANNEL_WIDTH	The perpendicular distance between two parallel boundaries.	Length
CHASSIS_TYPE	Chassis Type	Unitless
CHEMICAL_CONCENTRATION	The concentration of a chemical usually used during well operations, like drilling, cementing, acidizing, fracturing, etc.	MolePerVolume
CHEMICAL_FORMULA	A symbolic expression of the composition or constitution of a substance.	Unitless
CHID	Mask Hidden surface on 3D image	Unitless
CHI_RM	Caliper High limit from BS (RM)	CylinderDiameter
CHLORIDE_CONCENTRATION	Concentration of chloride ions in water based mud or in the water phase of oil based bud	PartPerMillion
CHLO_ZP	Zoned Volume of Chlorite	StandardVolumeRatio
CHO1	Choke Size 1	CylinderDiameter
CHO2	Choke Size 2	CylinderDiameter
CHO3	Choke Size 3	CylinderDiameter
CHOKE_LINE_ID	Choke line internal diameter	CylinderDiameter
CHOKE_LINE_LENGTH	Choke line length	Length
CHOKE_SIZE	Internal diameter of the flow choke(s)	OilfieldGaugeLength
CHP1	Casing Head Pressure 1	Pressure
CHP2	Casing Head Pressure 2	Pressure
CHP3	Casing Head Pressure 3	Pressure
CHR0	Peak Coherence, Receiver Array - Stoneley Mode	Unitless
CHR1	Peak Coherence, Receiver Array - Lower Dipole Mode	Unitless
CHR2	Peak Coherence, Receiver Array - Upper Dipole Mode	Unitless
CHR3	Peak Coherence, Receiver Array - Stoneley Mode	Unitless
CHR5	FMD Delta-T Coherence, Receiver Array	Unitless
CHRP	Peak Coherence, Receiver Array - P & S Comp	Unitless
CHRS	Peak Coherence, Receiver Array - P & S Shear	Unitless
CHT0	Peak Coherence, Transmitter Array - Stoneley Mode	Unitless
CHT1	Peak Coherence, Transmitter Array - Lower Dipole Mode	Unitless
CHT2	Peak Coherence, Transmitter Array - Upper Dipole Mode	Unitless
CHT3	Peak Coherence, Transmitter Array - Stoneley Mode	Unitless
CHT5	FMD Delta-T Coherence, Transmitter Array	Unitless
CHTP	Peak Coherence, Transmitter Array - P & S Comp	Unitless
CHTS	Peak Coherence, Transmitter Array - P & S Shear	Unitless
CIDA	Casing Inner Diameter for Casing A	CylinderDiameter
CIDB	Casing Inner Diameter for Casing B	CylinderDiameter
CIDZ	Casing Internal Diameter Zoned	Length
CINT	Correlation Interval (SHDT)	Length
CIRCULATING_PRESSURE	Fluid pressure under circulating conditions.	Pressure
CIRCULATION_LOSS_DEPTH	Depth at which circulation is being lost to the formation.	Length
CIRCULATION_LOSS_RATE	Rate of loss of drilling fluid to the formation, due to mud density exceeding formation fracture pressure gradient, and/or to drilling through a highly permeable formation.	MudLossRate
CJT	Cement Job Type	Unitless
CKGU	Check Gun Number	Unitless
CKSH	Check Shot Number	Unitless
CLA1_ZP	Zoned Volume of Clay 1	StandardVolumeRatio
CLA2_ZP	Zoned Volume of Clay 2	StandardVolumeRatio
CLAB	County/Parish Label, used with the COUN parameter (default value "COUNTY:")	Unitless
CLAINPT	Clay Input Switch	Unitless
CLASSIFICATION_METHOD_CODE	Classification method used in this activity.	Unitless
CLAY_RESISTIVITY	The Resistivity of clay, usually referring to that measured in the Earth formations.	Resistivity
CLC0	Clock Coefficient 0	Unitless
CLC1	Clock Coefficient 1	Unitless
CLC2	Clock Coefficient 2	Unitless
CLC3	Clock Coefficient 3	Unitless
CLC4	Clock Coefficient 4	Unitless
CLCL	Long-Spaced Control Loop Controller Mode	Unitless
CLCS	Short-Spaced Control Loop Controller Mode	Unitless
CLD	Comparison Listing Destination	Unitless
CLDS	Customer Log Depth Scale.	Unitless
CLDT	Customer Log Device Type	Unitless
CLED	Customer Log Extension Down	Length
CLEN	Cable Length	Unitless
CLET	Clean Cycle Time Multiplier	Unitless
CLEU	Customer Log Extension Up	Length
CLIENT	The code of a client, usually that of a Service, Contractor, Vendor or E&P company	Unitless
CLIENT_REPRESENTATIVE	Name of the client representative or company man.	Unitless
CLIM	Caliper Limit for Sonic	Length
CLIN	Customer Log Inserts	Unitless
CLLS	Long-Spaced High Voltage Mode	Unitless
CLOO	Current Loop Method	Dimensionless
CLOSURE_STRESS	Stress acting normal to a fracture surface.	Pressure
CLO_RM	Caliper Low limit from BS (RM)	CylinderDiameter
CLRL	Corroded Layer Resistance Limit	ElectricResistance
CLSP	Spacing of Caliper Measurement Displayed	Unitless
CLSS	Short-Spaced High Voltage Mode	Unitless
CLTB	Low Power Tool Bus Control	Unitless
CLUSTER_CONSTRAINT	Depth Constraint method flag by Cluster Analysis ( 1 == Yes, 0 == No )	Unitless
CMCE	Correction for Manometer Coefficient	Pressure
CMDT	Cable Marking Device Type	Unitless
CME	Continuity Module Existence flag	Unitless
CME0	Correction for Manometer Coefficient ME0	Unitless
CMEA	Cable Measurement, SPSE Switches	ElectricPotential
CMFF_ALBI	CMR Free Fluid response parameter for Albite	Porosity
CMFF_ANHY	CMR Free Fluid response parameter for Anhydrite	Porosity
CMFF_BIOT	CMR Free Fluid response parameter for Biotite	Porosity
CMFF_CALC	CMR Free Fluid response parameter for Calcite	Porosity
CMFF_CARB	CMR Free Fluid response parameter for Carbonate	Porosity
CMFF_CHLO	CMR Free Fluid response parameter for Chlorite	Porosity
CMFF_CLA1	CMR Free Fluid response parameter for Clay 1	Porosity
CMFF_CLA2	CMR Free Fluid response parameter for Clay 2	Porosity
CMFF_COAL	CMR Free Fluid response parameter for Coal	Porosity
CMFF_DOLO	CMR Free Fluid response parameter for Dolomite	Porosity
CMFF_EVAP	CMR Free Fluid response parameter for Evaporate	Porosity
CMFF_FELD	CMR Free Fluid response parameter for Feldspar	Porosity
CMFF_GLAU	CMR Free Fluid response parameter for Glauconite	Porosity
CMFF_GYPS	CMR Free Fluid response parameter for Gypsum	Porosity
CMFF_HALI	CMR Free Fluid response parameter for Halite	Porosity
CMFF_IGNE	CMR Free Fluid response parameter for Igneous	Porosity
CMFF_ILLI	CMR Free Fluid response parameter for Illite	Porosity
CMFF_ISOL	CMR Free Fluid response parameter for Isolated	Porosity
CMFF_KAOL	CMR Free Fluid response parameter for Kaolinite	Porosity
CMFF_META	CMR Free Fluid response parameter for Metamorphic	Porosity
CMFF_MONT	CMR Free Fluid response parameter for Montmorillonite	Porosity
CMFF_MUSC	CMR Free Fluid response parameter for Muscovite	Porosity
CMFF_ORTH	CMR Free Fluid response parameter for Orthoclase	Porosity
CMFF_PARA	CMR Free Fluid response parameter for Parallel	Porosity
CMFF_PYRI	CMR Free Fluid response parameter for Pyrite	Porosity
CMFF_QUAR	CMR Free Fluid response parameter for Quartz	Porosity
CMFF_SAND	CMR Free Fluid response parameter for Sand	Porosity
CMFF_SHAL	CMR Free Fluid response parameter for Shale	Porosity
CMFF_SIDE	CMR Free Fluid response parameter for Siderite	Porosity
CMFF_SILT	CMR Free Fluid response parameter for Silt	Porosity
CMFF_SMI1	CMR Free Fluid response parameter for Special Mineral 1	Porosity
CMFF_SMI2	CMR Free Fluid response parameter for Special Mineral 2	Porosity
CMFF_UGAS	CMR Free Fluid response parameter for Undisturbed Zone Gas	Porosity
CMFF_UIWA	CMR Free Fluid response parameter for Undisturbed Zone Irreducible Water	Porosity
CMFF_UNC_WM	CMR Free Fluid Weight Multiplier Zone Parameter	Unitless
CMFF_UNC_ZP	CMR Free Fluid Uncertainty Zone Parameter	Porosity
CMFF_UOIL	CMR Free Fluid response parameter for Undisturbed Zone Oil	Porosity
CMFF_USFL	CMR Free Fluid response parameter for Undisturbed Zone Special Fluid	Porosity
CMFF_UWAT	CMR Free Fluid response parameter for Undisturbed Zone Water	Porosity
CMFF_XBWA	CMR Free Fluid response parameter for Flushed Zone Bound Water	Porosity
CMFF_XGAS	CMR Free Fluid response parameter for Flushed Zone Gas	Porosity
CMFF_XIWA	CMR Free Fluid response parameter for Flushed Zone Irreducible Water	Porosity
CMFF_XOIL	CMR Free Fluid response parameter for Flushed Zone Oil	Porosity
CMFF_XSFL	CMR Free Fluid response parameter for Flushed Zone Special Fluid	Porosity
CMFF_XWAT	CMR Free Fluid response parameter for Flushed Zone Water	Porosity
CMI1	CSAT_1 Caliper minimum	Length
CMI2	CSAT_2 Caliper minimum	Length
CMI3	CSAT_3 Caliper minimum	Length
CMI4	CSAT_4 Caliper minimum	Length
CMNT	Tape Comment	Unitless
CMOD	Computation Mode	Unitless
CMON	Calibration Month of HP Gauge	Unitless
CMPAKI	Compute Using Akima Interpolation Flag	Unitless
CMPDIA	Compute Borehole Diameter Flag	Unitless
CMPFRM	Compute Formation Resistivity Flag	Unitless
CMPM	Computation Mode	Unitless
CMPMRS	Compute Mud Resistivity Flag	Unitless
CMPSTA	Compute Borehole Corrections Statistics Flag	Unitless
CMPSTF	Compute Tool Standoff Flag	Unitless
CMPZ	Z System measure Frequency for Thickness	Unitless
CMRP_ALBI	CMR Porosity response parameter for Albite	Porosity
CMRP_ANHY	CMR Porosity response parameter for Anhydrite	Porosity
CMRP_BIOT	CMR Porosity response parameter for Biotite	Porosity
CMRP_CALC	CMR Porosity response parameter for Calcite	Porosity
CMRP_CARB	CMR Porosity response parameter for Carbonate	Porosity
CMRP_CHLO	CMR Porosity response parameter for Chlorite	Porosity
CMRP_CLA1	CMR Porosity response parameter for Clay 1	Porosity
CMRP_CLA2	CMR Porosity response parameter for Clay 2	Porosity
CMRP_COAL	CMR Porosity response parameter for Coal	Porosity
CMRP_DOLO	CMR Porosity response parameter for Dolomite	Porosity
CMRP_EVAP	CMR Porosity response parameter for Evaporate	Porosity
CMRP_FELD	CMR Porosity response parameter for Feldspar	Porosity
CMRP_GLAU	CMR Porosity response parameter for Glauconite	Porosity
CMRP_GYPS	CMR Porosity response parameter for Gypsum	Porosity
CMRP_HALI	CMR Porosity response parameter for Halite	Porosity
CMRP_IGNE	CMR Porosity response parameter for Igneous	Porosity
CMRP_ILLI	CMR Porosity response parameter for Illite	Porosity
CMRP_ISOL	CMR Porosity response parameter for Isolated	Porosity
CMRP_KAOL	CMR Porosity response parameter for Kaolinite	Porosity
CMRP_META	CMR Porosity response parameter for Metamorphic	Porosity
CMRP_MONT	CMR Porosity response parameter for Montmorillonite	Porosity
CMRP_MUSC	CMR Porosity response parameter for Muscovite	Porosity
CMRP_ORTH	CMR Porosity response parameter for Orthoclase	Porosity
CMRP_PARA	CMR Porosity response parameter for Parallel	Porosity
CMRP_POLC_MAX	Maximum Polarization Correction Porosity to Trigger Insufficient Wait Time Flag	Porosity
CMRP_PYRI	CMR Porosity response parameter for Pyrite	Porosity
CMRP_QUAR	CMR Porosity response parameter for Quartz	Porosity
CMRP_SAND	CMR Porosity response parameter for Sand	Porosity
CMRP_SHAL	CMR Porosity response parameter for Shale	Porosity
CMRP_SIDE	CMR Porosity response parameter for Siderite	Porosity
CMRP_SILT	CMR Porosity response parameter for Silt	Porosity
CMRP_SMI1	CMR Porosity response parameter for Special Mineral 1	Porosity
CMRP_SMI2	CMR Porosity response parameter for Special Mineral 2	Porosity
CMRP_UGAS	CMR Porosity response parameter for Undisturbed Zone Gas	Porosity
CMRP_UIWA	CMR Porosity response parameter for Undisturbed Zone Irreducible Water	Porosity
CMRP_UNC_WM	CMR Porosity Weight Multiplier Zone Parameter	Unitless
CMRP_UNC_ZP	CMR Porosity Uncertainty Zone Parameter	Porosity
CMRP_UOIL	CMR Porosity response parameter for Undisturbed Zone Oil	Porosity
CMRP_USFL	CMR Porosity response parameter for Undisturbed Zone Special Fluid	Porosity
CMRP_UWAT	CMR Porosity response parameter for Undisturbed Zone Water	Porosity
CMRP_XBWA	CMR Porosity response parameter for Flushed Zone Bound Water	Porosity
CMRP_XGAS	CMR Porosity response parameter for Flushed Zone Gas	Porosity
CMRP_XIWA	CMR Porosity response parameter for Flushed Zone Irreducible Water	Porosity
CMRP_XOIL	CMR Porosity response parameter for Flushed Zone Oil	Porosity
CMRP_XSFL	CMR Porosity response parameter for Flushed Zone Special Fluid	Porosity
CMRP_XWAT	CMR Porosity response parameter for Flushed Zone Water	Porosity
CMR_FORM_H2O_SAL	CMR Formation Water Salinity	PartPerMillion
CMR_HI_COR_SW	CMR Hydrogen Index Correction Switch	Unitless
CMR_LOG_DIRECTION	Logging Direction	Unitless
CMR_LOG_SPEED	Optimal CMR logging speed	CableSpeed
CMR_PHI_OPT	CMR Porosity Algorithm Option	Unitless
CMR_SIGNAL_PROC_SW	CMR Signal Processing Switch	Unitless
CMR_TEMP_MC	CMR Temperature during Master Calibration	Temperature
CMR_TYPE	Marketing Name for CMR Tool (e.g. CMR-A, CMR-200)	Unitless
CMTC	SCMT Slow Channel Multiplexer Mode	Unitless
CMTM	SCMT Operating Mode	Unitless
CMTP	SCMT Tool position on CAN	Unitless
CMTY	Cement Type	Unitless
CMUD	Weight of Mud	MudDensity
CMX1	CSAT-1 Caliper Maximum	Length
CMX2	CSAT-2 Caliper Maximum	Length
CMX3	CSAT-3 Caliper Maximum	Length
CMX4	CSAT-4 Caliper Maximum	Length
CN	Company Name	Unitless
CN1	Company Name, Line 1	Unitless
CNAM	Contractor Curve Mnemonic	Unitless
CNA_CNTRATE_TYPE	Type of Countrates to Use	Unitless
CNB	CNT Calibrator Number	Dimensionless
CNC	CNT Cartridge Number	Dimensionless
CNCM	CNTA Calibration Mode	Unitless
CNH	CNT Housing Number	Dimensionless
CNLA	Flag for CNL	Unitless
CNLM	Multiplier of Standard Deviation for CNL	Unitless
CNPS	CNTG Neutron Porosity Selector	Unitless
CNRM	CNLREC Matrix for Alphanumeric Parameters	Unitless
CNRZ	CNLREC Bit Size Zoned Parameter Root	Length
CNTT	CNT Calibration Tank Temperature	Temperature
CNUM	Calibration Number	Unitless
CNV	Neutron Value for Carbon as Used in COAL Determination	Unitless
CNVR	Conversion Rate	Time
CO	Compressibility of OIL	Unitless
CO1	Comment #1	Unitless
CO10	Comment #10	Unitless
CO11	Comment #11	Unitless
CO12	Comment #12	Unitless
CO13	Comment #13	Unitless
CO14	Comment #14	Unitless
CO2	Comment #2	Unitless
CO2_CONCENTRATION	Concentration of Carbon Dioxide (CO2)	LowConcentration
CO2_FOAM_QUALITY	Ratio volume of CO2 over foam volume. Indicator of the quality of a foam generated with CO2 for well treatment. Below 50% the foam is not stable, above 95% the foam changes to a mist. C02 foam are used when low pH is required.	Percent
CO3	Comment #3	Unitless
CO4	Comment #4	Unitless
CO5	Comment #5	Unitless
CO6	Comment #6	Unitless
CO7	Comment #7	Unitless
CO8	Comment #8	Unitless
CO9	Comment #9	Unitless
COAL	COAL Cutoffs	Unitless
COAL_ZP	Zoned Volume of Coal	StandardVolumeRatio
CODA	Casing Outer Diameter for Casing A	CylinderDiameter
CODB	Casing Outer Diameter for Casing B	CylinderDiameter
CODE	Dictionary-controlled name of item	Unitless
COEF	Coefficients for Regression	Unitless
COFB	Caliper Brine Offset	CylinderDiameter
COFL	Caliper Long Spacing Offset	Length
COFN	Number of Corban Data Files to Transfer to Tape	Unitless
COFS	Caliper Short Spacing Offset	CylinderDiameter
COL1	Comment Label 1	Unitless
COL2	Comment Label 2	Unitless
COLL	Label Slowness Lower Limit - Monopole P&S Compressional	AcousticSlowness
COLLECTION_NAME	Name of collection	Unitless
COLOR	The aspect of objects and light sources that may be described in terms of hue, lightness, and saturation for objects and hue, brightness, and saturation for light sources.	Unitless
COLOR_DISTRIBUTION	A descriptive remark with respect to the distribution of a color within the area of a rock surface; e.g. solid, spotty, streaky.	Unitless
COLOR_FLUORESCENT_LIGHT	The color emitted by the fluid upon exposure to fluorescent light. Certain photoactive hydrocarbon molecules display characteristic color patterns under these conditions.	Unitless
COLOR_INTENSITY	A descriptive comment with respect to the intensity of color; e.g. bright, dull, powdery.	Unitless
COLOR_NORMAL_LIGHT	The color of a hydrocarbon show under normal incident light.	Unitless
COLP	Collision Protection	Unitless
COM1	Customer Comment 1	Unitless
COM2	Customer Comment 2	Unitless
COMN	Number of compressors	Unitless
COMO	Coring Mode	Unitless
COMP	Completion Type	Unitless
COMPANY_LEASE_NUMBER	Unique lease number assigned by owning company	Unitless
COMPLETION_COUNT	The count of the number of completions.	Unitless
COMPLETION_DATE	Date well was completed	Unitless
COMPLETION_SKIN	The skin effect resulting from the completion.	Unitless
COMPONENT_TYPE_VECT	Vector of component types which correspond to input clusters e.g. X, Y, Z, S	Unitless
COMPRESSIBILITY	The change in specific volume and density under pressure; the reciprocal of Bulk Modulus, 1/k.	InversePressure
COMPRESSIONAL_VELOCITY	Velocity of a compressional acoustic wave (Vp).	AcousticVelocity
COMPRESSIVE_STRENGTH	The degree of resistance of a material to force acting along one of the axes in a manner tending to crush it.	Strength
COMPUTATION_MASK	Application-specific mask for the computation options (one Anadrill example: 0001 - Torque & Drag, 0010 - BHA Tendency, 0100 - Bit Side Forces, 1000 - Buckling, 10000 - Yield Stress)	Unitless
COMPUTATION_TYPE	Computation method used in the generation of data.	Unitless
COMPUTE_SUPERPOS	Compute Superposition Step from Top and Bot	Dimensionless
COMP_TORQUE	The computed torque on the drillstring	HighTorque
COMP_WOB	The computed weight on bit	HighForce
COMT	Compressor type	Unitless
CONCENTRATION	The relative content of a component; e.g., the concentration of salts in brackish water, the concentration of electric charges in a circuit, etc.	Unitless
CONDUCTANCE	The product of conductivity and thickness. With direct current, the reciprocal of resistance. With alternating current, the resistance divided by the impedance squared; the real part of impedance.	Conductance
CONDUCTIVITY	A measure of the quantity of electricity transferred across unit area per unit potential gradient per unit time. In isotropic material, it is the reciprocal of Resistivity. Sometimes called Specific Conductance.	Conductivity
CONE_EDGE_TOL	Edge margin for edge dips detection test	PlaneAngle
CONFIDENCE_FACTOR	The confidence factor associated with any event or feature related to or detected, for example a geologic feature in/on the Earth.	Unitless
CONFIDENTIALITY_LEVEL	Describes the confidentiality of the information related to the well, e.g., Tight (operator only), Sensitive (some restriction), Public	Unitless
CONF_EXP_FACTOR	Exponent factor of USIT confidence	Unitless
CONNECTEDNESS_COEFFICIENT	A coefficient describing the connectedness of items, such as the connectedness between inclusions (e.g. lenses) in the Earth subsurface formations.	Unitless
CONN_1_BOX_FLAG	Flag indicating if Connection 1 is a Box (Y) or a Pin (N).	Unitless
CONN_1_OUTSIDE_DIAMETER	Outside diameter of tool joint/connection 1	CylinderDiameter
CONN_1_SIZE	Size of the top or the first standard tool connection.	CylinderDiameter
CONN_1_THREAD_TYPE	Complete and non ambiguous identification of the first threaded connection, e.g., "Hydril Joint Type EIU", "Pittsburgh Special ACME-Thread Casing-Internal-upset"	Unitless
CONN_1_TYPE	Type of the top or the first standard tool connection.	Unitless
CONN_2_BOX_FLAG	Flag indicating if Connection 2 is a Box (Y) or a Pin (N).	Unitless
CONN_2_OUTSIDE_DIAMETER	Outside diameter of tool joint/connection 2	CylinderDiameter
CONN_2_SIZE	Size of the bottom or second standard tool connection.	CylinderDiameter
CONN_2_THREAD_TYPE	Complete and non ambiguous identification of the second threaded connection, e.g., "Hydril Joint Type EIU", "Pittsburgh Special ACME-Thread Casing-Internal-upset"Description of the threaded connection	Unitless
CONN_2_TYPE	Type of the bottom or second standard tool connection.	Unitless
CONSISTENCY_INDEX	The k parameter in the Power-Law and Herschel-Bulkley rheological models. The Power_Law model is "Shear_Stress=k times (Shear_Rate at the power of n)". The unit of k is traditionally lbf.sec^n/ft^2 or Pa.s^n.	Unitless
CONSTRAINT_1	On/Off switch for ELAN-Plus constraint #1	Unitless
CONSTRAINT_10	On/Off switch for ELAN-Plus constraint #10	Unitless
CONSTRAINT_10S	On/Off Switch for ELANPlus Constraint #10	Unitless
CONSTRAINT_11	On/Off switch for ELAN-Plus constraint #11	Unitless
CONSTRAINT_11S	On/Off Switch for ELANPlus Constraint #11	Unitless
CONSTRAINT_12	On/Off switch for ELAN-Plus constraint #12	Unitless
CONSTRAINT_12S	On/Off Switch for ELANPlus Constraint #12	Unitless
CONSTRAINT_13	On/Off switch for ELAN-Plus constraint #13	Unitless
CONSTRAINT_13S	On/Off Switch for ELANPlus Constraint #13	Unitless
CONSTRAINT_14	On/Off switch for ELAN-Plus constraint #14	Unitless
CONSTRAINT_14S	On/Off Switch for ELANPlus Constraint #14	Unitless
CONSTRAINT_15	On/Off switch for ELAN-Plus constraint #15	Unitless
CONSTRAINT_15S	On/Off Switch for ELANPlus Constraint #15	Unitless
CONSTRAINT_1S	On/Off Switch for ELANPlus Constraint #1	Unitless
CONSTRAINT_2	On/Off switch for ELAN-Plus constraint #2	Unitless
CONSTRAINT_2S	On/Off Switch for ELANPlus Constraint #2	Unitless
CONSTRAINT_3	On/Off switch for ELAN-Plus constraint #3	Unitless
CONSTRAINT_3S	On/Off Switch for ELANPlus Constraint #3	Unitless
CONSTRAINT_4	On/Off switch for ELAN-Plus constraint #4	Unitless
CONSTRAINT_4S	On/Off Switch for ELANPlus Constraint #4	Unitless
CONSTRAINT_5	On/Off switch for ELAN-Plus constraint #5	Unitless
CONSTRAINT_5S	On/Off Switch for ELANPlus Constraint #5	Unitless
CONSTRAINT_6	On/Off switch for ELAN-Plus constraint #6	Unitless
CONSTRAINT_6S	On/Off Switch for ELANPlus Constraint #6	Unitless
CONSTRAINT_7	On/Off switch for ELAN-Plus constraint #7	Unitless
CONSTRAINT_7S	On/Off Switch for ELANPlus Constraint #7	Unitless
CONSTRAINT_8	On/Off switch for ELAN-Plus constraint #8	Unitless
CONSTRAINT_8S	On/Off Switch for ELANPlus Constraint #8	Unitless
CONSTRAINT_9	On/Off switch for ELAN-Plus constraint #9	Unitless
CONSTRAINT_9S	On/Off Switch for ELANPlus Constraint #9	Unitless
CONT	Continent	Unitless
CONTACT_SYMBOL	Symbol to post on the Feature_Boundary at the intersection point with another Feature_Boundary	Unitless
CONTACT_TYPE	The type of contact or interface between Earth subsurface regions	Unitless
CONTRACT_STATUS	Status of a contract.	Unitless
CONVEYANCE	Conveyance Type	Unitless
CONV_FLAG	Flag whether to convolve	Unitless
CONV_REF_DEPTH	Reference Depth for Convolving	StandardDepthIndex
COOLANT_TEMPERATURE	Temperature of the cooling fluid	Temperature
COPF	Coefficient of Permeability Formula Used in Chart E-4	Unitless
CORANG	Correlation Search Angle	PlaneAngle
CORE_BOX_COUNT	The number of core boxes containing samples from a cored borehole interval in a praticular well.	Unitless
CORE_DATE	Date on which the core was recovered.	Unitless
CORE_PREPARATION_METHOD	Method by which a core sample has been prepared for analysis.	Unitless
CORE_PRESERVATION_METHOD	Method by which a core sample has been preserved.	Unitless
CORE_SIZE	The outer diameter of the core which is, or was intended to be retrieved from the cored interval.	CylinderDiameter
CORING_FLUID_TYPE	The type of fluid that was in the borehole at the time the coring operation was in progress; e.g. water, brine, oil, mud, etc.	Unitless
CORING_METHOD	The type of method used to acquire a core sample; e.g. Rotary Conventional, Rotary Sponge, Sidewall Mechanical, etc.	Unitless
CORL	Correlation Length	Time
CORLN	Correlated Waveform Duration	ShortTime
CORM	Core Message	Unitless
CORRELATION_COEFFICIENT	Coefficient of a correlation used to determine the quality of the correlation	Unitless
CORRELATION_CUTOFF	Correlation Cutoff for Dip Computation (between 0.0 and 1.0)	Unitless
CORRELATION_MATRIX	Definition of Correlation Links between Sensors for Dip Computation	Unitless
CORREL_TYPE	Log Depth Match Correlation Type	Unitless
CORREL_WINDOW_STEP	Log Depth Match Correlation Window Step	Unitless
CORROSION_RATE	The rate at which corrosion, a complex chemical or electrochemical process by which metal is destroyed, occurs. For example the rate at which a casing pipe rusts (corrodes).	CorrosionRate
CORROSIVE_FLUID_FLAG	Is the fluid corrosive? (Y/N) Used to apply a wall erosion model to measure the pipe wall thickness.	Dimensionless
CORR_RESP_FLAG	Log response flag for corrosion (Increasing/Decreasing)	Unitless
CORS	Corridor Stack Processing Status	Unitless
CORW	Corridor Stacking Window	Time
COSD	Core Operation Summary Destination	Unitless
COST	Amount of money spent to obtain goods or services.	Unitless
COST_PER_DEPTH	Amount of money per unit of length	Unitless
COST_PER_MASS	Amount of money per unit of mass	Unitless
COST_PER_VOLUME	Amount of money per unit of volume	Unitless
COUL	Label Slowness Upper Limit - Monopole P&S Compressional	AcousticSlowness
COUN	County or Parish	Unitless
COUNTRY_CODE	Catalog-controlled code of a Country.	Unitless
COUNTY_CODE	Catalog-controlled code of a County or Parish.	Unitless
COV	Coefficient of VSH in Expression of Irreducible Water Volume	Unitless
COVEL	Coefficient for Velocity Equation	Unitless
COVI	Compressional Variability Index	Unitless
COZS	Carbon/Oxygen Zero Shift	Unitless
CO_CONCENTRATION	Concentration of Carbon Monoxide (CO)	Percent
CP	Compaction Correction Factor	Unitless
CPC	Calibration Point Constraints	Unitless
CPCF	Casing Properties Correction Factor	Unitless
CPER	Count Period	Time
CPF	Calibration Plot Flag for Flowmeters	Unitless
CPIF	Count Rate Porosity Indicator Flag	Unitless
CPP1TV	MDCP 1 Strain Gauge Temperature Source	Unitless
CPP2TV	MDCP 2 Strain Gauge Temperature Source	Unitless
CPP3TV	MDCP 3 Strain Gauge Temperature Source	Unitless
CPPL	Core Pushing Pressure Limit	Pressure
CPPT	Close Pad Pressure Threshold	Force
CPRFC1	MDCP 1 Resistivity Filter Control	Unitless
CPRFC2	MDCP 2 Resistivity Filter Control	Unitless
CPRFC3	MDCP 3 Resistivity Filter Control	Unitless
CPRFIL1	MDCP 1 Resistivity Filter Coefficient	Unitless
CPRFIL2	MDCP 2 Resistivity Filter Coefficient	Unitless
CPRFIL3	MDCP 3 Resistivity Filter Coefficient	Unitless
CPS	TDT Count Rate Porosity Sensitivity	CountRate
CPSF	Test Loop Phase Shift Far Calibration Constant	PhaseShift
CPSM	Test Loop Phase Shift Medium Calibration Constant	PhaseShift
CPSN	Test Loop Phase Shift Near Calibration Constant	PhaseShift
CPSZ	CNLREC Zoned Ratio CPS Parameter Root	Frequency
CPTL	Core Pushing Time Limit	Time
CPTP	Cal Point Trap Percentage	Unitless
CPVN	CP Version Number	Unitless
CPWN	CPW Number	Unitless
CQGF_DCC	CQGF Dynamic Compensation Coefficient	Dimensionless
CQGF_DCC_PUCS1	CQGF Dynamic Compensation Coefficient	Dimensionless
CQGF_DCC_PUCS2	CQGF Dynamic Compensation Coefficient	Dimensionless
CQGF_DCO	CQGF Dynamic Compensation Option	Unitless
CQGF_DCO_PUCS1	CQGF Dynamic Compensation Option	Unitless
CRAT	Cementing Rate	Unitless
CRBL	Caliper Brine Large Ring Measurement	CylinderDiameter
CRBS	Caliper Brine Small Ring Measurement	CylinderDiameter
CRCN	Corrected Radii Color scale Minimum	Length
CRCX	Corrected Radii Color scale Maximum	Length
CRE1	Cement Retarder 1	Unitless
CRE2	Cement Retarder 2	Unitless
CREF	Current Reference	Unitless
CREN	Current Return Path	Dimensionless
CRES	Brine Filter Constant	Length
CRET	Cement Retarder	Unitless
CREX	Current Reference Setting [AUTO(def), LOW, HIGH] (SRTX)	Unitless
CRITERIA_VECT	Vector of Criteria for Normalization Types e.g. [MAX NMO NRM DNO]	Unitless
CRITICAL_GAS_SATURATION	Critical Saturation for Gas	StandardVolumeRatio
CRITICAL_OIL_SATURATION	Critical Saturation for Oil	StandardVolumeRatio
CRITICAL_PRESSURE	The pressure needed to condense a vapor at its critical temperature. Applies to pure components; for mixtures use Pseudocritical_Pressure.	Pressure
CRITICAL_TEMPERATURE	The highest temperature at which a fluid can exist as a liquid and above which its vapor cannot be liquefied regardless of the amount of pressure. Applies to pure components; for mixtures use Pseudocritical_Temperature.	AbsoluteTemperature
CRITICAL_TRANSPORT_DEPTH	Depth at which critical transport rate for hole cleaning occurs	Length
CRITICAL_VOLUME	The inverse of density at the critical point of a fluid, describing the volume occupied by a fluid of unit mass.	VolumePerMass
CRITICAL_WATER_SATURATION	The highest water saturation a rock maintain while producing hydrocarbons before water will begin to flow.	StandardVolumeRatio
CRLL	Caliper Long Large Ring Measurement	CylinderDiameter
CRLS	Caliper Long Small Ring Measurement	CylinderDiameter
CRMS	Compression Range Modification Status	Unitless
CROSSFLOW_COEFFICIENT	Characterization of the flow in the reservoir from one layer to another layer, usually known as "Omega" in Reservoir Dynamics	Unitless
CROSSFLOW_FLAG	Indicates presence of crossflow	Unitless
CROSS_SECTION_AREA	The cross-sectional area of a solid object; e.g., area of perforation in a cased borehole.	Area
CROT	Compass Rotation	PlaneAngle
CRRV	Calibration Resistor Reference Value	Unitless
CRS	Code Index for Solution Gas-Oil Ratio Correlation	Unitless
CRSL	Caliper Short Large Ring Measurement	CylinderDiameter
CRSP	RST Count Rate Regulation Set Point	Kilohertz
CRSS	Caliper Short Small Ring Measurement	CylinderDiameter
CRT	Center Reject Thickness	Length
CRUSHED_ZONE_PERMEABILITY	Permeability of the Crushed Zone around perforation	Permeability
CRUSHED_ZONE_THICKNESS	Thickness of the Crushed Zone around perforation	ShortLength
CR_TYPE	Type of Countrates to Use	Unitless
CS1	Casing 1 Size (annotation)	Unitless
CS1I	Inner Casing Size of Casing #1	CylinderDiameter
CS1Z	Casing Size 1 (annotation) - Zoned	Unitless
CS2	Casing 2 Size (annotation)	Unitless
CS2I	Inner Casing Size of Casing #2	CylinderDiameter
CS3	Casing 3 Size (annotation)	Unitless
CS3I	Inner Casing Size of Casing #3	CylinderDiameter
CS4	Casing 4 Size (annotation)	Unitless
CSA	Cable Speed A Calibration Parameter	CableSpeed
CSAV	Compressive Strength Averaging	Unitless
CSB	Cable Speed B Calibration Parameter	Unitless
CSBL	CSB Number of Levels	Dimensionless
CSCG	Compressive Strength Conversion Gain	Unitless
CSCO	Compressive Strength Conversion Offset	Unitless
CSCS	SCMT Slow Channel Number	Unitless
CSD	Calibration Summary Destination	Unitless
CSD1	Inner Casing Outer Diameter	Length
CSD2	Outer Casing Outer Diameter	Length
CSDE	Casing Density	Density
CSDF	Cable Speed Display Flag (Y=Display CSS)	Unitless
CSDT	Compute Shear Delta-T Flag	Unitless
CSEL	Caliper Selection for Hole Volume Integration	Unitless
CSET	Caliper Set	Unitless
CSF	Neutron Tool Coeff. (.5 for CNL, 1. for SNP)	Unitless
CSGD	Casing Depth	Length
CSGW	Casing Weight	MassPerLength
CSG_YIELD_STRENGTH	Casing Yield Strength	Pressure
CSH	Current Shot Number	Unitless
CSHE	Coefficient relative to Shear Energy used for fracture energy	Unitless
CSHO	Current Shot Number	Dimensionless
CSID	Casing Inner Diameter	CylinderDiameter
CSID1	Casing 1 Inner Diameter	CylinderDiameter
CSID2	Casing 2 Inner Diameter	CylinderDiameter
CSID3	Casing 3 Inner Diameter	CylinderDiameter
CSIDOPT	RST Casing Inside Diameter Option	Unitless
CSIF	Critical Stress Intensity Factor	Pressure
CSIN	Inner Casing External Diameter	Length
CSIP	Casing Shutin Pressure	Pressure
CSIZ	Current Casing Size	CylinderDiameter
CSLL	Compressive Strength Lower Limit for VDL	Pressure
CSLN	Number of Corridor Stack Bottom Levels	Unitless
CSLU	Compressive Strength Upper Limit for VDL	Pressure
CSNF	No Fill Gap for Shear beyond this Value	AcousticSlowness
CSO	Outer Casing External Diameter	Length
CSOD	Casing Outer Diameter	CylinderDiameter
CSOD1	Casing 1 Outer Diameter	CylinderDiameter
CSOD2	Casing 2 Outer Diameter	CylinderDiameter
CSOD3	Casing 3 Outer Diameter	CylinderDiameter
CSOU	Clay Source Indicator	Unitless
CSPR	Corridor Stack Plot Repeat Number	Unitless
CSR	Curve Sampling Rate	Unitless
CSRL	Cycle Skip Recovery Logic Algorithm	Unitless
CSS	Sweep Speed for WF/VDL logs	Unitless
CSSX	Coefficient Used to Compute SXO from SW	Unitless
CST1	Validity flag tr1	Unitless
CST2	Validity flag tr2	Unitless
CST3	Validity flag tr3	Unitless
CST4	Validity flag tr4	Unitless
CST5	Validity flag tr5	Unitless
CST6	Validity flag tr6	Unitless
CST7	Validity flag tr7	Unitless
CST8	Validity flag tr8	Unitless
CST9	Validity flag tr9	Unitless
CSTA	 Counter Stack Number	Dimensionless
CSTE	Demagnetization Current Steps	Unitless
CSTEP_ANT1	Antenna 1 Smallest Capacitance Step on Tuning Board	Picofarad
CSTEP_ANT2	Antenna 2 Smallest Capacitance Step on Tuning Board	Picofarad
CSTP	Correlation Step (% - SHDT)	Unitless
CSTR	Compressive Strength of Cement	Pressure
CSV	Sonic Value for Carbon as Used in COAL Determination	AcousticSlowness
CSW	Casing Weight	MassPerLength
CSW1	Inner Casing Weight	MassPerLength
CSW2	Outer Casing Weight	MassPerLength
CSWA	Casing Weight for Casing A	MassPerLength
CSWB	Casing Weight for Casing B	MassPerLength
CSWT	Pipe Weight	MassPerLength
CSXO	Coefficient of Sxo	Unitless
CT	Caliper Type	Unitless
CT0D	CET T0 Delay WF/VDL Status	Unitless
CT1	Constant Tool 1	Unitless
CT1A	CT1 Response Apparent	Unitless
CT1_ALBI	Constant Tool 1 response parameter for Albite	Unitless
CT1_ANHY	Constant Tool 1 response parameter for Anhydrite	Unitless
CT1_BIOT	Constant Tool 1 response parameter for Biotite	Unitless
CT1_CALC	Constant Tool 1 response parameter for Calcite	Unitless
CT1_CARB	Constant Tool 1 response parameter for Carbonate	Unitless
CT1_CHLO	Constant Tool 1 response parameter for Chlorite	Unitless
CT1_CLA1	Constant Tool 1 response parameter for Clay 1	Unitless
CT1_CLA2	Constant Tool 1 response parameter for Clay 2	Unitless
CT1_COAL	Constant Tool 1 response parameter for Coal	Unitless
CT1_DOLO	Constant Tool 1 response parameter for Dolomite	Unitless
CT1_EVAP	Constant Tool 1 response parameter for Evaporate	Unitless
CT1_FELD	Constant Tool 1 response parameter for Feldspar	Unitless
CT1_GLAU	Constant Tool 1 response parameter for Glauconite	Unitless
CT1_GYPS	Constant Tool 1 response parameter for Gypsum	Unitless
CT1_HALI	Constant Tool 1 response parameter for Halite	Unitless
CT1_IGNE	Constant Tool 1 response parameter for Igneous	Unitless
CT1_ILLI	Constant Tool 1 response parameter for Illite	Unitless
CT1_ISOL	Constant Tool 1 response parameter for Isolated	Unitless
CT1_KAOL	Constant Tool 1 response parameter for Kaolinite	Unitless
CT1_META	Constant Tool 1 response parameter for Metamorphic	Unitless
CT1_MONT	Constant Tool 1 response parameter for Montmorillonite	Unitless
CT1_MUSC	Constant Tool 1 response parameter for Muscovite	Unitless
CT1_ORTH	Constant Tool 1 response parameter for Orthoclase	Unitless
CT1_PARA	Constant Tool 1 response parameter for Parallel	Unitless
CT1_PYRI	Constant Tool 1 response parameter for Pyrite	Unitless
CT1_QUAR	Constant Tool 1 response parameter for Quartz	Unitless
CT1_SAND	Constant Tool 1 response parameter for Sand	Unitless
CT1_SHAL	Constant Tool 1 response parameter for Shale	Unitless
CT1_SIDE	Constant Tool 1 respons